Commissioning; Preparation For Commissioning - C.L.BECKER HHPC 170/21 Operating And Maintenance Instructions Manual

6

Commissioning

Read, understand and consider this manual before starting up.
6.1

Preparation for commissioning

Unpack the unit and make sure that it is complete and undamaged. If it is not complete and unda-
maged, do not use the device. Consult your dealer in this case.
In order to simplify packaging and transportation, certain accessories may be shipped separately. In
this case, they must be installed by following these instructions, as shown in chapter 2.1.
Make sure that all packing materials (bags, boxes, mounting hardware) are kept out of reach of child-
ren.
Make sure before using the device that it has a nameplate and the information thereon comply with
the technical data in accordance with Chapter 10.1. If this sign is missing, do not use the device. Con-
sult your dealer immediately in this case.
Before connecting the appliance to the water supply to the grid you need to become familiar with the
function of its controls. These are explained in the manual with reference to the relevant displays and
illustrations.
Make sure that clean water flows to the device. If the device is operated without water, with contami-
nated, sandy water or with water with aggressive chemicals, instruction manual, this can cause dam-
age to the pump.
The HANSEAT high pressure cleaners HHPC-200/18 are allowed according to DIN 1988 only indirect-
ly to be connected to the public water supply, e.g. via a receiving tank or a pipe cutting. A receiving
tank with self-closing valve float or a pipe cutting system can be purchased through your dealer.
Make sure that the mains voltage matches the voltage on the nameplate.
The plug must comply with applicable local codes and be grounded.
The socket must be equipped with a magnetic breaker with a differential response sensi-
tivity to provide a maximum of 30mA.
Do not connect other devices to the same outlet.
Do not cover the device.
BA HHPC-170/21 60Hz englisch
Art.Nr. 02505004/60/BECKER/ENG
Stand 05/2013 Seite 10 von 23