Rear Mounting Using The Vesa Interface; Connections 865299 - Philips M8031B Service Manual

3 Installation (865299)

Rear Mounting Using the VESA Interface

If the display is already connected to a pedestal, remove the four screws that connect the pedestal to
1
the display (refer to Figure2-1 , item 1 ). Separate the pedestal from the display.
Reinstall the four screws into the VESA interface mount. Ensure that the monitor is positioned
2
with the correct side up.
Mount the monitor to the wall according to the template shown in Figure 2-2. Route the cables
3
through the cable access opening (Figure2-2, item 1 ).
Figure 2 Rear Mount Template (not to scale)

Connections 865299

24
Connections 865299