Hitachi 17LD4200 Service Manual page 24

Please make sure the SYSTEM menu is ON status before selecting it. (Please refer to above
SYSTEM- OFF ON setting in the SETUP menu.)
SYSTEM
PAL/SECAM/SECAM L
1.Press "MENU" (on main body) or "►" (on remote
control) button.
2.Press " " (on main body) or "→" (on remote
control) button to select SYSTEM.
3.Press " " (on main body) or "↑, ↓" (on remote
control) button to select PAL / SECAM / SECAM L.
4.Press " " (on main body) or "←, →" (on remote
control) button to select the appropriate PICTURE
signal type from PAL, SECAM, and SECAM L.
SOUND
1.Press "MENU" (on main body) or "►" (on remote
control) button.
2.Press " " (on main body) or "→" (on remote
control) button to select SYSTEM.
3.Press " " (on main body) or "↑, ↓" (on remote
control) button to select SOUND.
4.Press " " (on main body) or "←, →" (on remote
control) button to select the appropriate sound system
from B/G, D/K, or I. The sound system will display on
top-righter coner of screen "B", "D" or "I" of your
choice.
NICAM
1.Press "MENU" (on main body) or "►" (on remote
control) button.
2.Press " " (on main body) or "→" (on remote control)
button to select SYSTEM.
3.Press " " (on main body) or "↑, ↓" (on remote
control) button to select NICAM.
4.Press " " (on main body) or "←, →" (on remote
control) button to select ON or OFF. You can select ON
if your set is equipped with the receiver for NICAM
reception. The high quality NICAM (Near
Instantaneous Companded Audio Multiplex) digital
sound can be received.
24