Hitachi 17LD4200 Service Manual page 22

SETUP
CH. SEARCH
Press "MENU" (on main body) or "►" (on remote
1.
control) button.
Press " " (on main body) or "→" (on remote
2.
control) button to select SETUP.
Press " " (on main body) or "↑, ↓" (on remote
3.
control) button to select CH. SEARCH.
Press " " (on main body) or "←, →" (on remote
4.
control) button to select NO or YES. If you select YES,
the TV will scan program channels automatically.
CH. MEMORY
Press "MENU" (on main body) or "►" (on remote
1.
control) button.
Press " " (on main body) or "→" (on remote
2.
control) button to select SETUP.
Press " " (on main body) or "↑, ↓" (on remote
3.
control) button to select CH. MEMORY.
Press " " (on main body) or "←, →" (on remote
4.
control) button to select NO or YES. If you select
YES, the TV will add the you are currently watching
to the memory.
FINE TUNE
If the reception is clear, you do not have to fine-tune the
channel, as this is done automatically during the search
and store operation. If however the signal is weak or
distorted, you may have to fine-tune the channel
manually.
Press "MENU" (on main body) or "►" (on remote
1.
control) button.
Press " " (on main body) or "→" (on remote
2.
control) button to select SETUP.
Press " " (on main body) or "↑, ↓" (on remote
3.
control) button to select FINE TUNE.
Press " " (on main body) or "←, →" (on remote
4.
control) button to fine-tune the channel manually if the
reception is not very clear. You can increase or decrease
the number to achieve the best picture.
CH. SWAP
1. Press "MENU" (on main body) or "►" (on remote
control) button.
2. Press " " (on main body) or "→" (on remote
control) button to select SETUP.
3. Press " " (on main body) or "↑, ↓" (on remote
control) button to select CH. SWAP.
4. Press " " (on main body) or, press the appropriate
numbers on remote control to select the original
channel number you'd like to change.(eg 001).
5. Repeat the last operation to assign the target channel
number to the original channel.
22