Philips 42-50-63PF9631D/37 Manual page 24

EN
Settings
Setup
Preferences
Source
Clock
Info
Settings
Setup
Preferences
Source
Clock
Info
22
Use of the Setup menu (continued)
Select your source
Source This menu allows you to identify the accessory devices you have
connected to the external inputs/outputs.
AV1
AV2
1. Select Source in the Setup menu.
AV3
2. Press the cursor right to enter the list of types of external
HDMI 1
inputs.
HDMI 2 3. Select the appropriate input with the cursor up/down.
> When you select
Side
Digital Audio In
4. Press the cursor right again to enter the list of types of
devices connected to the selected input.
5. Select the accessory device with the cursor up/down.
Digital Audio
If an accessory device has a digital audio output, you can
connect this with a single cable to the TV's Digital Audio
in jack.
In the Source menu, assign the Digital Audio in to the
corresponding exernal input to which your accessory device
is connected
The TV can output Digital audio via the
OUT
If your amplifier or receiver has a matching connector for
Digital Audio In, you can connect it with a single cable to
the TV's
See To make Video and Audio connections, Digital Surround
receiver, p. 49.
Set your clock
Clock
This allows you to use your TV as a clock.
Auto clock mode
Auto clock channel
Note: Adjusting the clock is necessary for the correct working
of Lock after (See TV settings, Channels, p. 30) features.
Time
Day
Time zone
Auto clock mode
Daylight saving
1. Select Clock in the Setup menu.
2. Press the cursor right to select the Auto clock mode.
3. Press the cursor right to instruct the TV to get the time
automatically or manually.
Note: Most of the TV channels are not transmitting clock
information.There are few cable channels but they are at the
end of the channel ring.There is no clock transmission in
antenna channels. In such cases either clock extraction is
taking a long time or there is no clock.
,
AV1 AV2
Side, a list appears allowing you to identify which type
of accessory device is attached to this input.
connector to an external amplifier or receiver.
DIGITAL AUDIO OUT
, , , or
AV3 HDMI 1 HDMI 2
DIGITAL AUDIO
.