Philips 42-50-63PF9631D/37 Manual page 16

How to search for and store TV channels (continued)
EN
Settings
Installation
Language
Autoprogram
Weak channel ins.
Software upgrade
Info
Television installation
Installation mode
Antenna
Cable
Previous Next
14
Store TV channels
After language is set correctly, you can now search for and
store the TV channels.
Autoprogram
1. Select Autoprogram in the Installation menu.
Start now
2. Press the cursor right.
3. Press the
4. Select Cable or Antenna in the Installation mode.
> When Antenna is selected, the TV will detect antenna
> When Cable is selected, the TV will detect cable
Note: Make sure that registration with your cable TV
provider and connection of equipment are completed.
Please select your
5. Press the green corresponding color button on the remote
installation mode.
control for "Next".
Note: All channels must be unlocked in order to
autoprogram. If requested, enter your PIN code to unlock
all channels. See Adjust Menu preferences in the Settings,
TV menu, p. 20.
6. Press the green corresponding color button on the remote
control for "Start" to start autoprogramming.
> The menu screen disappears and the progress of
> When Autoprogramming is complete, a message appears
Notes:
• When you have locked TV channels while initiating
autoprogram, a message appears asking to enter your PIN code
in order to complete autoprogramming.
• When interrupted, the updated channel information is retained
as well as the not yet updated old channel information.
• Background autoprogramming occurs only when the TV is
turned on.
• Channel information of an ATSC channel is updated only for
the ATSC channel currently tuned.
• Once you have searched for as well the available Antenna as
well as the Cable TV channels, they are stored in the memory.
OK button.
signals and will search for antenna TV (NTSC and ATSC)
channels available in your local area.
company supplied signals and will search for cable TV
(NTSC, ATSC, QAM modulated) channels available in
your area.
autoprogramming is displayed.
The progress bar indicates the number of analog and
digital TV channels found.
confirming the completion and the TV switches to the
first installed TV channel.