Philips 42-50-63PF9631D/37 Manual page 9

Use of the remote control RC4403 (Continued)
POWER POWER
FORMAT
MY CONTENT
GUIDE GUIDE
FAV FAV
. .
. .
VOL CH
MUTE MUTE
-
SOURCE SOURCE
INFO PIP A/CH
Volume
VOL
Press + or - to adjust the volume.
MUTE
Interrupt the sound or restore it.
Channel selection
CH
- To browse through the TV channels or sources stored and
marked in the Preferred channels list (see p. 33);
- To quickly browse through the list in the menus;
- To switch the TV on from standby mode;
- To select between Antenna or Cable TV channels, first
make your selection in the Settings menu, see p. 14.
Note:You don't have to start the installation again once you
have searched for and stored the available TV channels.
Numeric buttons
To select a TV channel.
Press repeatedly to select
AV/SOURCE
, Side or TV channels when in TV mode, according
HDMI
to where you connected the accessory devices (p. 38).
- Type the dash (-) for digital channels.
Ambilight
- Ambilight: Press to switch Ambilight On or Off.
For the Ambilight settings, see TV menus, Ambilight, p. 28.
- : Press this button repeatedly to toggle through the
MODE
Ambilight modes.
Ò‡π†® Audio and Video equipment buttons
See Audio and Video equipment buttons, p. 50.
See Multimedia browser functional buttons, p. 37.
INFO
Display information: Press to display (when available)
information about the selected TV channel and program or
accessory device.
HDMI Dual screen/PIP See p.17
PIP
To watch a broadcast and a HDMI source simultaneously.
A/CH
Press to alternate between the currently viewed channel
and the previously viewed channel.
, , ,
AV1 AV2 AV3
7
EN