Advertisement
Operating Your Radiant Heater
How To Operate
1.
Remove your heater from the
packaging, unwind the cord to its
full length.
2. Loosen safety grill fixing screws
and remove any element support
Guards (ie foam or paper
packing). Ensure front grill and
screws are in position before
operating the heater.
3.
Read all the instructions fully
before plugging the unit in.
4. Place the heater on a level
surface in a stable position. Make
certain the control dial is in the
OFF position.
5. Plug the power cord in a 230V or
240V outlet, and switch the power
outlet on.
6. The heater control panel is
located at the right hand side of
the unit.
7.
Use the control dial to switch the
heater to the desired setting.
WARNING: To avoid
fire hazard the element
packing supports and
warning label must
be removed before
switching the power on.
7
Advertisement
