AquaticLife 540371 Installation, Operation And Maintenance Manual page 6

Model: 540371
Twist-In 100 GPD 4-Stage RO/DI Unit
Installation, Operation & Maintenance Guide
INSTALL THE COLOR CODED TUBING
The Aquatic Life TI Units include color coded tubing
to help easily identify filtered, incoming and waste water.
This also makes it easier to correctly connect the tubing
to the unit.
Refer to the instructions on how to use Buddie Fit press
fittings before installing the tubing (pg. 5).
Step 1 – Connect one end of the yellow tubing to the
incoming water supply. This will be the Hose Bib or
Under Sink Water Adapter.
Step 2 – Connect the other end of the yellow
tubing to the port on the TI Module closest to the
Sediment Cartridge.
Step 3 – Cut the yellow tubing and install the
¼" Manual On/Off Valve in a convenient place
in the water supply line.
Step 4 – Connect one end of the red tubing to the
waste port on the TI module. The other end of the
red tubing should be connected to the Saddle Drain
or secured in a way to handle the waste water.
Step 5 – Connect one end of the blue tubing to the
filtered water port on the TI module. This is the port
closest to the DI Cartridge. The other end of the
blue line should be plumbed to the container that
will collect your Reverse Osmosis/Resin filtered water.
From
Plumbing Diagram
Faucet
w w w . a q u a t i c l i f e . c o m
6
Waste
Water
Filtered
Water