Advertisement
Quick Links
RO Daddy
Instruction Guide
™
PARTS LIST
Filter Housing
Filter Cartridges
• Micron
• GAC (Granular Activated Carbon)
• Solid Carbon Block
Tubing
Flush Valve Assembly
Membrane 1,000 GPD (77°F, 65 PSI, 100 TDS)
Pressure Gauge
Canister Wrench
Visit www.AquaticLife.com
for helpful videos.
WARNING:
Please read carefully before proceeding with installation.
Failure to follow these instructions or operating parameters
may lead to the product's failure and possible property damage.
THANK YOU
for your purchase of the Aquatic Life RO Daddy.
With proper installation and maintenance, this system will provide
you with high quality water for many years. All Aquatic Life
products are tested by us to ensure safety and reliability.
Aquatic Life assumes No Responsibility for water damage
due to leaks. It is the user's responsibility to ensure the system is
leak-free. If you have any questions or concerns, please contact
our customer support department at 1-888-548-3480
Monday-Friday, 8:00 AM – 4:00 PM Pacific Time or by e-mail
at customersupport@aquaticlife.com.
w w w . a q u a t i c l i f e . c o m
Advertisement
Related Manuals for AquaticLife RO Daddy
Summary of Contents for AquaticLife RO Daddy
- Page 1 • Micron • GAC (Granular Activated Carbon) THANK YOU for your purchase of the Aquatic Life RO Daddy. • Solid Carbon Block With proper installation and maintenance, this system will provide Tubing you with high quality water for many years.
-
Page 2: Initial Setup
Instruction Guide ™ INITIAL SET-UP Your RO Daddy utilizes a metal frame to securely support the membrane and three large (blue) canisters securely. The frame can be secured to a wall so that it cannot move easily but it should NOT be suspended by the frame. The weight of the unit without water is 75 pounds, when water is added it will exceed 110 pounds, and the frame cannot support the weight if suspended. - Page 3 RO Daddy Instruction Guide ™ MEMBRANE CONNECTION The RO Daddy is shipped with a U – shaped connection that needs to be installed. This connection allows the pre-filtered water from the canisters to flow into the membrane housing. CONNECTING THE WASTE WATER LINE AND FLUSH VALVE ASSEMBLY –...
- Page 4 SUPPLY WATER CONNECTION – The RO Daddy uses a ¾” slip PVC connection to allow for multiple connection options. Wrap the ¾” male threaded connection with plumber’s Teflon tape prior to inserting into the threaded female connection on the side of the canister housing.
-
Page 5: Membrane Replacement
RO Daddy Instruction Guide ™ MEMBRANE REPLACEMENT With proper use and flushing, the membrane should last 12 months or more. Membrane life depends on the water supply, maintenance of the filter cartridges and how often the membrane is flushed to prevent build up. - Page 6 RO Daddy Instruction Guide ™ MEMBRANE REPLACEMENT (CONT.) CARTRIDGE REPLACEMENT - MAINTENANCE š When the plug is removed, the membrane The cartridges should be monitored and logged for best located inside the housing is visible. Pull the performance. It is extremely important that you do not run...
- Page 7 Aquatic Life, LLC must be delivered by United States or electronic mail to the following address: U.S. Mail: Aquatic Life, LLC, 2416 W. Victory Blvd, #136, Burbank, CA 91506 or electronic mail: customersupport@aquaticlife.com. Aquatic Life, LLC shall be allowed a reasonable period of time to investigate any warranty claim and to perform any testing Aquatic Life, LLC deems necessary to determine the cause of the defect.