Bodet BT6000 Installation And Use Manual page 21

Badminton
The pre-recorded configuration for each sport can be modified. Select and validate a sport and a type of rules Hold down
the SEL (8) key to access to the configuration menu :
- Press the + or – (13) keys to modify the values of each parameter.
- Press the RIGHT (13) key to scroll down through all the parameters
- Press the LEFT (13) key to scroll up
- Press the OK (11) key to save the new parameters and return to the display of the match.
Rule 1
Number of sets
/game : 3
Nb of points
/set : 21
Display game
duration : No
Display time
break : No
Time break betwn
sets : 120sec
Time break for
lastset : 120sec
Buzzer
active : No
Factory data
load : No
Configuration menu per sport
Rule 2 Rule 3 Parameters
3 3
1 to 99 points
21 21
No No
No No
120 sec 0 to 990 seconds
120 sec
0 to 990 seconds
90 sec 90 sec
No No
No No
1 to 5 sets Selection of the number of maximum sets per match.
Selection of the number of points per set for automatic affectation of
the set if 2 points gap.
Allow to manage dna display on the board the toatal playing time of
Yes or No
the match. Press the "start" key at the start up of the match.
Allow to display on the board the rest time between the sets (display
Yes or No
console and scoreboard).
If = 0, no automatic countdown.
If > 0, the console will automatically countdown the programmed
duration at the end of the set.
Press the "Stop" key to stop this countdown.
If = 0, no automatic countdown
If > 0, the console will automatically countdown the programmed
duration at the end of the set.
Press the "Stop" key to stop this countdown.
If Yes, activate the console's buzzer.
Yes or No
If No, deactivate the console's buzzer during the match.
If YES, reload the values of parameters as provided
Yes or No
on putting the display board into service.
Description
4/4
21