4. Loosen the screws and pry up the latches. Then remove the base cover assembly.
5. Install a new base cover assembly in place and tighten the screws.
6. Turn the computer over. Connect the ac power adapter and all cables to the computer.
Replacing the wireless-WAN card
The following information only applies to computer with user-installable modules.
Before you start, read "Important safety information" on page v and print the following instructions.
Attention: Before you start installing a wireless-WAN card, touch a metal table or a grounded metal object.
This action reduces any static electricity from your body. Static electricity could damage the card.
To replace the wireless-WAN card, do the following:
1. Disable the built-in battery. See "Disabling the built-in battery" on page 93.
.
Chapter 9
Replacing devices
95