Stihl MS 240 Instruction Manual page 118

No. Description
28 Service tool AS (set)
- Installing tool
- Screw sleeve
29 Service tool ZS (set)
- Washer
- Screw sleeve
30 Press arbor
31 Press arbor
32 Assembly tube
33 Stud puller M8
34 Installing tool
35 Hook
36 Torque wrench
37 Torque wrench
38 Screwdriver bit, T 27 x 125
39 Screwdriver bit, T 27 x 150
40 Crimping tool
41 Pliers DIN 5254-A 19
Remarks:
1) Use for releasing only.
MS 240, MS 260, MS 260 C
Part No. Application
5910 007 2205 Removing and installing crankshaft
(clutch side)
5910 890 2205 Pulling two halves of crankcase
together
5910 893 2409 Pulling two halves of crankcase
together
5910 007 2200 Removing and installing crankshaft
(ignition side)
5910 893 2101 Installing crankshaft
5910 893 2421 Installing crankshaft
1118 893 7200 Removing and installing ball bearings
1120 893 7200 Removing and installing ball bearing
(clutch side)
1117 890 0900 Attaching springs
5910 893 0501 Removing bar mounting studs
0000 890 2201 Installing rope guide bushing
5910 893 8800 Removing pickup body
5910 890 0302 0.5 to 18 Nm
5910 890 0312 6 to 80 Nm
0812 542 2104 Removing and installing spline socket
screws with electric or pneumatic
screwdrivers; tightening down screws
with torque wrench
5910 890 2400 IS-P screws (4 mm)
5910 890 8210 Attaching connectors to electrical wires
0811 611 8380 Removing and installing external
circlips
Rem.
117