Controls And Indicators - Innova 3320 Owner's Manual

Controls and Indicators

CONTROLS AND INDICATORS
1.
DCV Function: Measures DC
volts. Auto-ranging from 0 to
600 volts (10 MW impedance)
2.
ACV Function: Measures AC
volts. Auto-ranging from 0 to
600 volts (10 MW impedance)
3.
Resistance
Measures resistance. Auto-
ranging from 0 to 20MW
(20,000,000W).
4.
ACmA Function: Measures
AC current in milliamps. One
range: 0 to 200 milliamps.
5.
DIODE Function
testing diodes.
6.
CONTINUITY Function
two points.
7.
Volts, mA, OHMS, BAT, DIODE and CONTINUITY Input
Jack.
8.
COM Input Jack: Common Input Jack.
9.
DC10A Input Jack: For red test lead probe connection
when measuring high DC current (up to 10 amps only).
10.
DC10A Function: Measures DC current. One range:
10Amps (DC from 0 to 10 amperes). Unfused.
11.
DCmA Function: Measures DC current in Milliamps. One
range: 0 to 200 milliamps.
12.
Battery Test Function: Four ranges and three LEDS
(green, yellow and red). Tests small batteries; 1.5V, 6V, 9V
and 12V.
13.
OFF Function: Turns unit "off" when function is selected.
14.
Function/Range
function or range.
15.
Liquid Crystal Display (LCD): Displays results of tests or
measurements.
4
13
12
Function:
14
11
10
: For
: Tests for continuity between
Selector Switch:
9 8 7
Selects desired
15
1
2
3
4
5
6