Table of Contents
Advertisement
REVERSING THE DOOR
Reversing the door
For the doors on the BFS50W
1. Remove the plastic covering from the
bottom door hinge.
2. Unscrew the three screws from the bot-
tom bracket. Remove the foot from oppo-
site side
3. Place to one side.
4. Slide the Appliance door down about
15cm [61 and off the Top hinge pin and
lift away from the Appliance.
5. Remove the two screws from top bracket
and replace on the other side. You will
need to first remove the plastic caps from
the other side.
6. Slide the Appliance door back on to the
top hinge,making sure it's the right way
up. Screw the bottom hinge into place on
the new side. Replace the other foot on
the other side. Replace the plastic cover-
ing by clicking back into position on the
door hinge.
7. Check that the door is aligned horizon-
tally and vertically and that the seals are
closed on all sides before finally tight-
ening the bottom hinge. Re-adjust the
levelling feet.
Advertisement
Table of Contents
