Changing The Plug - Lec essenChill LC BFS50W User Manual

CHANGING THE PLUG

Any electrical work required to install
this appliance should be carried out by a
qualified electrician or competent person.
This appliance must be earthed. The
manufacturer declines any liability should
these safety measures not be observed.
Electrical Requirements
Before switching on, make sure the electricity
supply voltage is the same as that indicated
on the appliance rating plate. The appliance
is supplied with a 13 amp plug fitted. In the
event of having to change the fuse in the
plug supplied, a 13 amp ASTA approved
(BS 1362) fuse must be used. Should the
plug need to be replaced for any reason.
The wires in the mains lead are coloured in
accordance with the following code:
Green and Yellow: Earth
Blue: Neutral
Brown: Live
The wire coloured green and yellow must
be connected to the terminal marked with
the letter "E" or by the earth symbol
coloured green and yellow. The wire coloured
blue must be connected to the terminal
marks "L".
Upon completion there must be no cut, or
stray strands of wire present and the cord
clamp must be secure over the outer sheath.
Important!
The plug must still be accessible after the
appliance has been installed. The appliance
should not be connected to the electrical
supply by means of an extension cable.
In case that the electrical cable has to be
replaced, please contact the Customer Care
Centre and arrange a service engineers visit.
WARNING: A cut off plug inserted into a
13 amp socket is a serious safety (shock)
hazard. Ensure that it is disposed of safely.
This appliance complies with the following
E.E.C Directives: 2006/95/EC (Low Voltage
Directive) and subsequent modifications,
2004/108/EC (Electromagnetic Compatibility
Directive) and subsequent modifications.
Note: Figured in the user manual are only
for reference. The actual product may differ
slightly
or