Connecting To A Tv Equipped With Phono Type Jacks - Toshiba RD-XS32SB Owner's Manual

Connections

Connecting to a TV equipped with phono type jacks

Select the connection type depending on the TV. (Normal TV/TV equipped with an S video input)
Normal TV
To video To audio
input input
(yellow)
TV equipped with
an S video input
To S video
input
• The following setting is required according to the TV
that you are connecting. Perform this setting after step
4 ( page 15).
Setting "AV1 output" on the
TV
Normal TV
TV equipped with an
S video input
Note
• If your television set has one audio input, connect the left and right audio outputs of the recorder to a Y cable adapter (not
supplied) and then connect to your TV.
16
Video/Audio cable (supplied)
To audio
input
Audio cable (not supplied)
S video cable (not supplied)
"Audio out select" on the
"Initial settings" menu. "Picture/Audio settings"
page 43 menu.
No need to set. "Analog 2ch"
No need to set. "Analog 2ch"
To VIDEO OUT
(yellow)
To ANALOG AUDIO OUT
(R:red, L:white)
page 48
To ANALOG AUDIO OUTPUT
(R:red, L:white)
To S-VIDEO OUTPUT