Focusrite 18i8 User Manual page 26

5. Run the installer
6. Connect your Scarlett with the included IEC power cable,
connect the device to your PC using the included USB cable then
power up the unit
7. Go to "CONTROL PANEL" then "SOUND" and select your
Scarlett Eg. "Scarlett 18i20" as the playback and recording default
device
8. You are now ready to use your audio interface
(Please Note: You may need to select the Scarlett as your
interface within your music software preferences)
DOWNLOADING THE INCLUDED SOFTWARE
To download the included software, you will need to register your
Scarlett at focusrite.com/register
You will need the product serial number, found on the bottom of
your hardware
Once you have entered the serial number, you will be asked to
enter your PRODUCT BUNDLE CODE, found printed on the inside
of the product box in the following format:
XXXXXX-XXXXXX-XXXXXX
This info is accurate as of May 2016, however we are constantly
striving to improve the customer experience and as a result this
process is subject to change. If anything appears to have changed
please refer to www.focusrite.com/get-started for the latest info.
Focusrite is a trademark of Focusrite Audio Engineering Limited
registered in the UK and other countries. Scarlett 6i6, Scarlett 18i8
and Scarlett 18i20 are trademarks of Focusrite Audio Engineering
Limited registered in the UK and other countries. 2016 © Focusrite
Audio Engineering Limited. All rights reserved.