Install Channels; Select Your Menu Language; Set Your Location To Home; Automatically Install Channels - Philips 32PFL3504D User Manual

7 Install Channels

The fi rst time you setup your TV, you are prompted to select a menu
language and to install TV and digital radio channels (if available). This
chapter provides instructions on how to reinstall and fi ne-tune channels.

Select Your Menu Language

1
Press MENU on the remote control and select [LANGUAGE].
PICTURE
Select your menu language.
SOUND
SETUP
Seleccione el idioma para el menú.
FEATURES
LANGUAGE
Sélectionnez la langue du menu.
USB
2
Select a language and press OK to confi rm your choice.
3
Press MENU to exit.

Set Your Location to Home

You can set the location of your TV to [Home] or [Retail].
Choosing Home gives you full fl exibility to change predefi ned settings for
picture and sound.
1
Press MENU on the remote control and select [FEATURES] >
[Location].
2
Select [Home] and press OK to confi rm your choice.
3
Press MENU to exit.

Automatically Install Channels

Before you install channels, ensure that you are registered with your
cable TV provider and that your equipment is correctly connected.
1
Press MENU on the remote control and select [SETUP] >
[Autoprogram].
PICTURE Autoprogram

Channel List

SOUND
Add Channels
SETUP
FEATURES Antenna
LANGUAGE
USB
EN
24
2
Press OK to start the installation.
If you run [Autoprogram] when you have locked channels, a
message appears asking to enter your PIN . Enter your PIN in
order to complete the installation.
If you have forgotten your PIN, reset it as described in 'Change
your PIN' on page 19.
3
Select [Antenna] or [Cable] and press OK.
•
•
PICTURE
English
SOUND
SETUP
Español
FEATURES
LANGUAGE
Français USB
*The illustration is discribed for 42PFL3704D.
•
4
Follow the on-screen instructions to complete the installation.
Channel List
The channels selected here can be skipped when selecting the channels
using CH +/-.
Those channels can still be selected with the Number buttons.
1
Press MENU on the remote control and select [SETUP] >
[Channel List].
PICTURE
SOUND
SETUP
FEATURES
LANGUAGE
USB
When [Antenna] is selected, the TV detects antenna signals. It
searches for NTSC and ATSC channels available in your area.
When [Cable] is selected, the TV detects signals supplied by
cable. It searches for NTSC, ATSC, and QAM modulated
channels available in your area.
Autoprogram will rescan all channels.
Auto programming will take up to 20 minutes
to complete.
Select your signal source.
Antenna
Or
Cable
When autoprogramming is complete, the lowest memorized
channel will be displayed.
Autoprogram
Channel List
Add Channels
Antenna
Back
Antenna
Cable
ANT.IN