Watch A Dvd; Switching Audio Mode - Philips 32PFL3504D User Manual

Watch a DVD

To watch a DVD
1
Insert a DVD disc into your player.
2
Press on the remote control of the DVD player to select
channels.
» The DVD might automatically play on the TV.
If the picture does not appear
1
Press SOURCE repeatedly to select the DVD player and wait a
few seconds for the picture to appear.
2
Use the remote control of the DVD player to play the disk.

Switching Audio Mode

This section describes how to switch the audio in the analog mode and
how to switch the audio language in the digital mode.
Press SAP to display the currently selected audio mode. While
receiving an MTS broadcast, press repeatedly to cycle through the
available audio channel.
SAP / STEREO
When all audio are available
SAP / STEREO
SAP / STEREO
When stereo and monaural audio are available
MONO / STEREO
When SAP and monaural audio are available
SAP / MONO
When only monaural audio is available
MONO
(Cannot be switched)
STEREO : Outputs stereo-audio
SAP : Outputs second audio program
MONO
: Outputs mono-audio
6
SAP / MONO
MONO / STEREO
SAP / MONO
1
Press SAP to display the currently selected language and the
number of available languages.
English 1/3
2
Press SAP repeatedly to cycle through the available audio
languages.
• Available languages differ depending on the broadcast. [Other]
is displayed when the audio language cannot be acquired, or the
acquired languages are other than English, Spanish or French.
Note
•
SAP does not control external audio devices.
•
The information display will automatically disappear in a few seconds.
6.1
EN
15