Technics SU-G700 Operating Instructions Manual page 12

Control reference guide
Remote control
Using the remote control
2
R03/LR03, AAA
(Alkaline or manganese batteries)
Note
• Insert the battery so the terminals (
) match those in the remote control.
• Point it at the remote control signal sensor on
this unit. ( 10)
• Keep the batteries out of reach of children to
prevent swallowing.
12
(12)
1
and
01 [AMP ]: Standby/on button
• Press to switch the unit from on to standby
mode or vice versa. In standby mode, the
unit is still consuming a small amount of
power.
02 [AMP]/[NWP]/[CD]:
Select the device to be operated