Get Started; Power Supply - Philips BT6600 Manual

Hide thumbs Also See for BT6600:
Table of Contents

Advertisement

3 Get started

Always follow the instructions in this
chapter in sequence.

Power supply

Either AC power or battery can be used
as power supply of this product.
Option 1: Battery power
The speaker can operate on the built-in
rechargeable battery.
Note
Rechargeable battery has a limited number
of charge cycles. Battery life and number of
charge cycles vary by use and settings.
It takes approximately four hours to fully
charge the battery.
The LED indicator flashes red when the
battery is low.
To recharge the built-in battery:
Dock the speaker into the charging
base, then connect the speaker to
AC power by using the supplied
adaptor; or
Connect the speaker to AC power
by using the supplied adaptor
directly.
Battery status
Under charging
Fully charged
Option 2: AC power
Caution
Risk of product damage! Make sure that the
power voltage corresponds to the voltage
printed on the back or underside of the
speaker.
Risk of electric shock! When you unplug the
AC adapter, always pull the plug from the
socket. Never pull the cord.
Connect the adapter to:
the DC IN socket on the speaker or
on the charging base;
the power outlet.
LED indicator
Solid red (in
power-off mode) ;
Flashing red for
three seconds,
then turn blue (in
power-on mode)
Off (in power-off
mode)
EN
4

Advertisement

Table of Contents
loading

Table of Contents