Table of Contents
Advertisement
Mode selector
Press the
(SELECT) button to select the required mode : DVD or AUX.
The remote control indicator lights up to display the selected mode. It switches
off automatically after 20 seconds if left idle. The remote control automatically
returns to TV mode.
The following keys are opertaional depending on the equipment :
standby
fast rewind
fast forward
recording
pause
stop
play
tv menu
cancel
Installing your television set
navigation and adjustments
digit keys
programme selection
audio selection
OSD menu
& Positioning the television set
Place your TV on a solid stable surface. To
avoid danger, do not expose the TV to water
or a heat source (e.g. lamp, candle, radiator).
Do not obstruct the ventilation grid at the
rear of the set. Leave at least 5 cm around each
side of TV set to allow for proper ventilation.
é Connecting the aerials
• Use the aerial connection lead supplied and
connect the ¬ socket situated at the bottom
of the TV to your aerial socket.
• Connect the power lead to the television and
the mains plug into the wall socket (220-240V/
50 Hz).
" Switching on
To switch on the set, press the POWER key. A
green indicator comes on and the screen lights
up. Go straight to the chapter "Switching on
for the first time on page 8. If the television
remains in standby mode, press the P(age) +
key on the remote control.
The indicator will flash when you use the remote
control.
7
Advertisement
Table of Contents
