Connecting Other Appliances; Tv / Vcr / Dvd Mode Selector - Philips 29PT5515/58 Product Manual

Connecting other appliances

TV / VCR / DVD mode selector

The remote control allows you to control the main functions of your video recorder or DVD.
(only available on certain versions)
Carry out the connections featured opposite.
N
Using the key, select EXT3 for a VHS or 8mm
c a m c o rder and S-VHS3 * for an S-VHS or Hi-8 camcord e r.
For a mono set, connect the sound signal to the AUDIO L (or
AUDIO R) input.The sound automatically comes out of the left
and right speakers of the set.
Headphones
@ " #
The
the headphones and on the set. Press
cut off the sound on the set.
The headphones must have an impedance of between 32 and
600 ohms.
& Set the switch on the side of the remote control to
the required mode:TV,VCR (video recorder) or DVD.
é Then press one of the following keys:
standby
contrast + setting *
enter a number
bring up a menu *
I J
select ( ) and set (
select programme,
·
record *,
¢ rewind,
Ê
stop,
Æ
play,
∫ fast forward,
%
programming *,
confirm*
OK
∆
pause
* Some programming functions are not available on all
models (cursors, menu, OK key, etc.). For video recorders
equipped with the Easylink function: when the set is on
standby, pressing the
automatically (only available on certain versions).The
remote control is compatible with all the video recorders
in our range as well as models which use the RC5
signalling standard.
keys allow you to adjust the volume on
m
K L
) *
Æ H
or key once switches it on
if you want to
13