Pamex FKL User Manual page 38

TROUBLESHOOTING GUIDELINE
Problem
E. Can not open the door after input
a correct
F. Yellow indicator is on or keeps
flashing
G. What happens if the lever lock
cannot be auto- locked after
closing door
H. Yellow indicator keeps flashing or
the lock keeps beeping after
unlocking.
I. Red indicator keeps flashing and
beeping when I try to program the
lockset
1. Make sure you have entered the correct user code.
2. Check to see if the indicator is flashing. If the indicator is
flashing, please replace the batteries with new ones.
3. Please make sure the strike plate is installed correctly if you
see the latch is jammed.
1. It means these batteries are getting low, please replace all
the batteries.
2. Use alkaline batteries only.
1. Make sure the arrow of the thumbturn is directed to LOCK.
2. Make sure the key is withdrawn from the lock.
1. It means these batteries are getting low, please replace all
the batteries.
2. Use alkaline batteries only.
1. Make sure you have entered the correct programming
code.
2. Make sure the lever is leveled (horizontal) completely.
36
Solutions