Pamex FKL User Manual page 16

INSTALLATION INSTRUCTIONS
7-1. MOUNTING EXTERIOR ASSEMBLY
A. Slide the spindle and screw posts through the latch and thread the cable under the latch.
B. Thread the cable through the rectangular hole in the mounting plate and combine the posts of
the mounting plate and the exterior assembly.
C. Fasten the mounting plate with 2 screws (32mm or 1 1 /4'') while ensuring the exterior assembly
is held in the ''true vertical'' position on door face.
NOTE: Exterior assembly will not sit completely flush with door face until screws are tightened
completely as there are 2'' anchoring spikes'' which prevent the exterior assembly from
shifting/wobbling during usage.
A
Mounting plate
B
Cable
14
C