Retrotec DM32 Operation Manual page 29

•
Tapping a [Jog] key so that target pressure changes causes the "@ Pressure" label to change as
well.
Figure 29: [@ Pressure] extrapolates to the target pressure when a pressure is set
Figure 30: Jogging pressure while using [@ Pressure] changes target and @ pressure label
If [Set Speed] function is used:
•
Tapping [@ Pressure] so that it "is On" extrapolates the [Channel B] Result to the [Default @
Pressure] using the "n" value, both set in the second "Settings" screen.
Page 29 of 91
© Retrotec 2017