Yamaha DTT3KSP Service Manual page 46

PANEL LAYOUT
Pad Controller Knob Level Adjustment Knob
(コントローラつまみ) (レベル調整つまみ)
A Rim
(Aリム部)
DISASSEMBLY PROCEDURE
1. JK Circuit Board
1-1. Remove the four (4) screws marked [H60a]. The back
board can then be removed. (Photo 1)
1-2. Remove the controller knob and the three (3) screws
marked [H60b]. The JK circuit board can then be
removed. (Photo 2, 3)
2. Hoop Assembly
2-1. Remove the six (6) cap screws marked [30] (with
six (6) washers). The hoop assembly can then be
removed. (Photo 4)
[H60a] [H60a] Back board (裏蓋) Back board (裏蓋)
Hoop Assembly Hoop Assembly
(フープAss'y) (フープAss'y)
(Photo 1)
[30] [40]
[30] [30]
Frame assembly (フレームAss'y) Frame assembly (フレームAss'y)
（パネルレイアウト）
B Rim
(Bリム部)
Pad
(パッド)
（分解手順）
[H60a] [H60a]
Knob, Controller Knob, Controller
(コントローラつまみ) (コントローラつまみ)
(Photo 2)
[30] [40]
[30] [30]
(Photo 4)
Cap Screw 5.0x25 MFZN2BL (WB966500) 六角穴付ボルト
[30]:
[H60]: Bind Head Screw 3.0x6 MFZN2BL (EG330360) +バインド小ネジ
Output Jack
(出力端子)
1. JKシート
1-1. [H60a]のネジ4本を外して、裏蓋を外します。
(Photo1)
1-2. コントローラつまみを外し、[H60b]のネジ3本
を外して、JKシートを外します。(Photo 2, 3)
2. フープAss'y
2-1. [30]の六角穴付ボルト6本(ワッシャ6個)を外し
て、フープAss'yを外します。(Photo 4)
Frame assembly Frame assembly
(フレームAss'y) (フレームAss'y)
(Photo 5)
[H60b] [H60b]
JK JK
(Photo 3)
Pad assembly (10) Pad assembly (10)
(パッドAss'y (10)) (パッドAss'y (10))
TP120SD
3