Related Manuals for Cuisinart FS-75 Series
Summary of Contents for Cuisinart FS-75 Series
- Page 1 INSTRUCTION BOOKLET FS-75 Series Kitchen Pro Food Slicer For your safety and continued enjoyment of this product, always read the Instruction Book carefully before using.
-
Page 2: Important Safeguards
4. To protect against risk of electrical shock, do not put appliance in modify the plug in any way. water or other liquids. 20. Do not leave the Cuisinart ® Food Slicer unattended while it 5. This appliance should not be used by or near children or individuals with is running. - Page 3 REPACKING INSTRUCTIONS in this manual, please refer to a qualified service center recommended by Cuisinart. Always read the instructions for use carefully before using and keep them in a place where they can be referred to whenever necessary. 1. Put food slicer on a large, sturdy, flat surface.
-
Page 4: Table Of Contents
The Cuisinart Food Slicer eliminates one of the most time-consuming ® For all your slicing needs, from paper thin to extra thick, the Cuisinart ® jobs in food prep. This commercial-quality slicer adjusts from ⁄... -
Page 5: Parts
PARTS 1. ON/OFF Switch 2. Slice Control Knob 3. Non-Slip Feet 4. 7.5" Stainless Steel Blade 5. Food Guide 6. Plastic Safety Guard 7. Removable Stainless Steel Slicing Carriage 8. Center Hub for Blade Removal... -
Page 6: Use And Care
USE AND CARE CLEANING AND MAINTENANCE 1. To use your Cuisinart Food Slicer, place on a sturdy, flat surface. Always unplug your Cuisinart Food Slicer and turn the slice control knob back ® ® to zero before cleaning the appliance. DO NOT PUT THE APPLIANCE IN 2. -
Page 7: Warranty
Food Slicer that was purchased at retail for personal, family or household Cuisinart will be responsible for the cost of the repair, replacement, and shipping and use. Except as otherwise required under applicable law, this warranty is not available to handling for such products under warranty. - Page 8 ©2015 Cuisinart 150 Milford Road East Windsor, NJ 08520 Printed in China Trademarks or service marks of third parties used herein are the 15CE016188 trademarks or service marks of their respective owners. IB-13907-ESP-A...
Need help?
Do you have a question about the FS-75 Series and is the answer not in the manual?
Questions and answers
the blade is loose
To fix a loose blade on a Cuisinart FS-75 Series food slicer, follow these steps:
1. Unplug the unit to ensure safety.
2. Remove the blade by pressing the tab in the center hub, twisting it clockwise, and carefully lifting it off.
3. Inspect the blade and hub for any debris or damage.
4. Reattach the blade by aligning it properly with the hub and twisting it counterclockwise until it locks securely.
5. Ensure the blade is firmly in place before using the slicer again.
If the blade remains loose, check for worn or damaged parts and consider contacting customer service for assistance.
This answer is automatically generated