Olympus C-740 Ultra Zoom Basic Manual page 11

Memory gauge
The memory gauge lights up when you take a still
picture. While the gauge is lit, the camera is
storing the picture on the card. The memory
gauge indication changes as shown below
depending on the shooting status. The indication
is not displayed during movie recording.
a
Shoot
Before
shooting
(Gauge is off)
Battery check
If the remaining battery power is low, the battery check indication changes as
follows when the camera is turned on or while the camera is in use.
e
Lights (green)
(Goes off after a while)
Remaining power level:
high
b
Shoot
One picture
taken
(Lit)
f
Blinks (red)
Remaining power level: low
Ready new batteries.
Battery check indication
SQ1 SQ1 1600 1200 1600 1200
c
Shoot
Wait
More than No more pictures
two taken can be taken
(Lit)
Wait until the gauge
returns to the status
on the left to take the
next shot.
No indication
Remaining power level:
exhausted
Replace with new batteries.
F2.8 F2.8
Memory gauge
d
En
(Fully lit)
En 9