1. Manuals
  2. Brands
  3. Olympus Manuals
  4. Digital Camera
  5. CAMEDIA C-770 Ultra Zoom
  6. Reference manual

Olympus C-770 - Ultra Zoom 4MP Digital Camera Reference Manual

Reference manual
Hide thumbs Also See for C-770 - Ultra Zoom 4MP Digital Camera:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Basic Manual

DIGITAL CAMERA

C-770 Ultra Zoom
REFERENCE MANUAL
<Click Here>
CAMERA OPERATION MANUAL
Explanation of digital camera functions and operating instructions.
DIGITAL CAMERA - PC CONNECTION
OPERATION MANUAL
Explanation of how to download images between your digital camera and PC.

Advertisement

Table of Contents
loading

Related Manuals for Olympus C-770 - Ultra Zoom 4MP Digital Camera

Summary of Contents for Olympus C-770 - Ultra Zoom 4MP Digital Camera

  • Page 1: Digital Camera

    DIGITAL CAMERA C-770 Ultra Zoom REFERENCE MANUAL <Click Here> CAMERA OPERATION MANUAL Explanation of digital camera functions and operating instructions. DIGITAL CAMERA - PC CONNECTION OPERATION MANUAL Explanation of how to download images between your digital camera and PC.
  • Page 2 DIGITAL CAMERA C-770 Ultra Zoom REFERENCE MANUAL Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference.
  • Page 3 Model Number : C-770 Ultra Zoom RM-2 (Remote control) Trade Name : OLYMPUS Responsible Party : Olympus America Inc. Address : 2 Corporate Center Drive, Melville, New York 11747-3157 U.S.A. Telephone Number : 1-631-844-5000 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE This device complies with Part 15 of the FCC rules.

  • Page 4: How To Use This Manual

    How to use this manual This manual contains a list of contents, an index and a list of menus to enable you to easily find the function that you want to use or find out more about. Using the list of contents g P.6 All the titles in the manual are listed here, grouped into chapters.
  • Page 5 How to use this manual A sample page is shown below to explain how to read the instructions in this manual. Look at it carefully before taking or viewing pictures. See the reference pages for further details on how to use the power switch or menus. Slide the power switch to one of these symbols.

  • Page 6: Composition Of The Manual

    Composition of the manual Contents Names of parts P.12 Getting started P.18 Introduction of the camera’s functions Using the menus P.34 Basic Photography Shooting basics P.47 Flash P.61 Advanced Photography To get that particular shot Advanced shooting P.73 using various effects or for fine-tuning the settings.

  • Page 7: Table Of Contents

    Contents How to use this manual ....... 3 Composition of the manual ......5 Names of parts .
  • Page 8 Contents If correct focus cannot be obtained ..... 54 Using the Focus Lock function ..... 54 Subjects that are difficult to focus on .
  • Page 9 Contents AE LOCK – Locking the exposure ....88 Macro mode shooting ......90 Super macro mode shooting .
  • Page 10 Contents 7 Playback Viewing still pictures ......124 QUICK VIEW........125 Close-up playback .
  • Page 11 Contents Information display ......160 Monitor/viewfinder brightness adjustment ... 161 REC VIEW .
  • Page 12 Contents 11 Miscellaneous Error codes ........200 Troubleshooting.

  • Page 13: Names Of Parts

    Names of parts Camera Remote control receiver g P.93 Zoom lever (W/T•GU) g P.58 Shutter button g P.51 Mode dial g P.47 Self-timer/Remote control lamp g P.92 Flash g P.61 Hot shoe g P.69 Strap eyelet g P.18 Microphone P.103, 104, 139 Speaker Lens DC-IN jack g...

  • Page 14: Names Of Parts P

    Names of parts Viewfinder g P.14, 32, 51, 161 Diopter adjustment dial g P.32 AE Lock/Custom button (x) P.81, 86, 88, 149 Rotation button (y) g P.138 Self-timer/Remote control button (Z) P.92 Erase button (S) g P.145 Flash mode button (#) P.61 Protect button (0) P.143...

  • Page 15: Viewfinder And Monitor Indications

    Names of parts Viewfinder and monitor indications INFO setting allows you to select how much information to display on the screen. Screens with the Information display set to ON are shown below. g“Information display” (P.160) Shooting modes MPEG4 MPEG4 00:36 00:36 00:36 2288 1712...

  • Page 16: P.103,

    Names of parts Ref. Item Indications Page !, # , $, # SLOW1, HSLOW1, 10 Flash mode P.61 #SLOW2 w -2.0 – +2.0 11 Flash intensity P.68 control o, j, i, k, BKT 12 Drive P.95 13 Self-timer P.92 < Remote control P.93 14 Sound record...

  • Page 17: Playback Mode

    Names of parts Playback mode 3 4 5 MPEG4 MPEG4 640 480 2288*1712 2288*1712 '04.06.1 '04.06.1 7 7 1 1 5:30 5:30 00:00/00:20 00:00/00:20 '04.06.17 15:30 '04.06.17 15:30 Still picture Movie Ref. Item Indications Page e, f 1 Battery check P.17 2 Switch frame P.144...

  • Page 18: Memory Gauge

    Names of parts Memory gauge The memory gauge lights up when you take a still Battery check picture. While the gauge is lit, the camera is storing the picture on the card. The memory gauge indication changes as shown below depending on the shooting status.

  • Page 19: Getting Started

    Note • Attach the strap correctly as shown above so that the camera does not fall off. If the strap is attached incorrectly and the camera falls off, Olympus is not responsible for any damages.

  • Page 20: Battery/Card Basics

    Battery/card basics Charging the battery This camera uses an Olympus lithium-ion battery (LI-10B). Other types of batteries cannot be used. The battery is not fully charged at the time of purchase. Be sure to use the specified battery charger (LI-10C) to charge the battery before use. For more information, read the manual supplied with the battery charger.

  • Page 21: Card Basics

    Compatible cards • xD-Picture Card (16 – 512MB) • This camera may not recognize a non-Olympus card or a card that was formatted on another device (such as a PC, etc.). Before use, be sure to format the card on this camera. g“CARD SETUP –...

  • Page 22: Inserting And Removing The Battery And Card

    Battery/card basics Inserting and removing the battery and card Make sure the camera is turned off. • The power switch is set to OFF. • The monitor is off. • The viewfinder is off. • The lens is not extended. Slide the battery compartment/card cover in the direction of A, then lift in the direction of B.
  • Page 23 Battery/card basics • The life of the battery may vary according to the shooting conditions, etc. Note • The amount of power consumed by the camera varies considerably depending on shooting conditions, etc. • Power is consumed continuously during the conditions described below.

  • Page 24: Removing The Card

    Battery/card basics Removing the card Push the card all the way in to unlock it, then let it return slowly. • The card is ejected a short way and then stops. Hold the card straight and pull it out. Close the battery compartment/card cover in direction C and then slide it in the direction shown D.

  • Page 25: Using An Ac Adapter (Optional)

    An AC adapter is useful for time-consuming tasks such as image downloads to a computer. An optional Olympus CAMEDIA-brand AC adapter allows you to power your digital camera from a common AC wall outlet. Be sure to use the specified AC adapter.

  • Page 26: Power On/Off

    Power on/off Press the tabs on the lens cap as indicated by the arrows and remove the lens cap. Slide the power switch to q, K Mode dial or n. • The camera and the monitor turn on. • The mode in which the camera turns on varies depending on the position of the power switch.

  • Page 27: Startup/Shutdown Screen

    Power on/off TIPS • In n or q mode, there is no need to set the mode dial. The camera will record movies or play back pictures regardless of the position of the mode dial. • To save battery power, the camera automatically enters the sleep mode and stops the operation after about 3 minutes of non- operation.

  • Page 28: If The Card Is Not Recognized (Card Check)

    Power on/off If the card is not recognized (card check) When the power is turned on, the camera checks the card automatically. If there is no card in the camera or a card that is not supported by this camera is inserted, the following screen is displayed.

  • Page 29: Selecting A Language

    Selecting a language You can select a language for on-screen display. This reference manual shows the English on-screen display in the illustrations and explanations. Available languages vary depending on the area where you purchased this camera. Slide the power switch to K to Power switch turn the camera on.
  • Page 30 Selecting a language Press ac to select a language, then press e. ENGLISH FRANCAIS DEUtSCH ESPAÑOL SELECt Press e again to exit the menu. Power switch To turn the camera off, slide the power switch to OFF. button...

  • Page 31: Setting The Date And Time

    Setting the date and time Slide the power switch to K to Power switch turn the camera on. Mode dial Arrow pad OK button Press e. • The top menu is displayed. Press d on the arrow pad to select MODE MENU MODE MENU.
  • Page 32 Setting the date and time Press ac to select one of the following date formats: Y-M-D (Year/Month/Day), M-D-Y (Month/ 2004 2004 Day/Year), D-M-Y (Day/Month/Year). Then press d. • Move to the year setting. SELECt • The following steps show the procedure used when the date and time settings are set to Y-M-D.

  • Page 33: Adjusting The Viewfinder

    Adjusting the viewfinder To make the camera easier to use, adjust the viewfinder to match the eyesight (visual acuity) of the person using the camera. Slide the power switch to K. Power switch • The camera and the monitor turn on. Mode dial Press f.

  • Page 34: Holding The Camera

    Holding the camera Hold the camera firmly with both hands while keeping your elbows at your sides to prevent the camera from moving. When taking pictures in the vertical position, hold the camera in a position as shown in the illustration. For the best results, hold camera so that flash is positioned higher than the lens.

  • Page 35: Using The Menus

    2 Using the menus About the menus When you turn on the camera and press e, the top menu is displayed on the monitor. The functions of this camera are set from the menus. This chapter explains how the menus work, using the P screens in K mode. The top menu is displayed.

  • Page 36: How To Use The Menus

    How to use the menus Press e to display the top Press ac to select menu, then press d. a tab, then press d. Top menu CAMERA tab MODE MENU DRIVE AUtO AUtO A/S/M Press b to return to the tab selection PICTURE tab screen.
  • Page 37 How to use the menus Press ac to select the Press ac to select a item, then press d. setting. Press e to complete setting. Press e again to exit the menu and return to shooting status. Slider bar DRIVE This is also displayed on other AUtO AUtO...

  • Page 38: Shortcut Menus

    Shortcut menus The menu that is displayed varies depending on the position of the power switch. In K mode, the menu that is displayed also varies depending on the position of the mode dial. K mode i j k l m o r p P DRIVE CARD SEtUP...
  • Page 39 Shortcut menus n mode DIGItAL ZOOM MODE MENU DIGITAL ZOOM Extends telephoto capability beyond maximum optical zoom. P.60 Selects the image quality and resolution from MPEG4, SHQ, HQ P.106 and SQ. Sets the appropriate white balance according to the light source. P.113...
  • Page 40 Shortcut menus q mode Still picture Movie MOVIE PLAY INFO MODE MENU INFO MODE MENU SWItCH FRAME SWItCH FRAME Runs through all saved pictures one after another. P.129 MOVIE PLAY MOVIE Plays back movies. P.130 PLAYBACK Creates an index picture of a movie in 9 INDEX P.133 frames.

  • Page 41: Mode Menus

    Mode Menus The MODE MENU has 4 tabs. Press ac to select a tab and display the associated menu items. K mode CAMERA tab PICTURE tab DRIVE CARD tab AUtO AUtO SETUP tab A/S/M CAMERA tab Selects the metering method (ESP, 5 ESP/5 P.85 or MULTI).
  • Page 42 AF MODE P.78 SPOT). Allows panorama pictures to be taken PANORAMA P.98 with Olympus CAMEDIA-brand cards. Combines two still pictures taken in 2 IN 1 succession and stores them as a single P.100 picture. Adds special effects to pictures (BLACK FUNCTION &...
  • Page 43 Mode Menus SETUP tab Selects whether to keep the current ALL RESET camera settings when you turn off the P.147 power. Selects a language for on-screen P.28 display. Selects the picture and sound that are PW ON/OFF SETUP output when the power is turned on or P.167 off.
  • Page 44 Mode Menus n mode CAMERA tab PICTURE tab AUtO AUtO CARD tab FULLtIME AF SETUP tab FUNCtION CAMERA tab Selects the metering method (ESP or ESP/5 P.85 Used to take pictures of a close subject. & P.90 Selects OFF, & , %. Selects the ISO sensitivity from AUTO, P.111 64, 100, 200 and 400.
  • Page 45 Mode Menus SETUP tab Selects whether to keep the current ALL RESET camera settings when you turn off the P.147 power. Selects a language for on-screen P.28 display. Selects the picture and sound that are PW ON/OFF SETUP output when the power is turned on or P.167 off.
  • Page 46 Mode Menus q mode PLAY tab EDIT tab CARD tab SETUP tab PLAY tab Stores the necessary information on the < card to allow you to print the pictures P.173 taken. Displays a histogram showing the P.122 luminance distribution. Adds sound to a still picture already taken. P.139 The PLAY tab is not displayed during movie playback.
  • Page 47 Mode Menus Registers a stored picture for use as the SCREEN SETUP picture displayed when the power is P.168 turned on and off. Adjusts the brightness of the viewfinder P.161 or monitor. Sets the date and time. P.30 Selects NTSC or PAL according to your VIDEO OUT TV’s video signal type.

  • Page 48: Shooting Basics

    3 Shooting basics Shooting modes In K mode, use the mode dial to select a still picture shooting mode. Set the mode dial to the best position for the situation and shooting conditions. The shooting modes include modes where the optimal settings for the situation are automatically selected, and modes where you can select the settings best suited to the shooting conditions and the effect you wish to achieve.

  • Page 49: Sports Shooting

    Shooting modes j Sports shooting Suitable for capturing fast-moving action (such as sports) without blur. Even a fast-moving subject will be clear and sharp, as if it is not moving, enabling you to capture facial expressions and detailed activity. The camera automatically sets the optimal shooting conditions.
  • Page 50 Shooting modes Setting-related modes P Program shooting Allows you to take still pictures. The camera sets the aperture and shutter speed. Other functions, such as flash modes and drive modes, can be adjusted manually. p Aperture priority/Shutter priority/Manual shooting When the mode dial is set to p, the following items can be set with the menus.
  • Page 51 Shooting modes S Shutter priority shooting Allows you to set the shutter speed manually. The camera sets the aperture automatically. Set the shutter speed according to the subject and the type of effect you want. g“Shutter priority shooting” (P.75) Setting the shutter speed Setting the shutter speed higher lets you capture fast- lower blurs a moving subject,...

  • Page 52: Taking Still Pictures

    Taking still pictures You can take still pictures using either the monitor or the viewfinder. Slide the power switch to K. Shutter button g“Power on/off” (P.25) Mode dial Flash button • The monitor turns on. To shoot using the viewfinder, press f to turn the viewfinder on.
  • Page 53 Taking still pictures Press the shutter button gently (halfway) to adjust the focus. • When the focus and exposure are locked, F2.8 F2.8 the green lamp lights (focus lock). • The AF target mark moves to the focused position. • The shutter speed and aperture value automatically set by the camera are displayed (except in M mode).
  • Page 54 Taking still pictures To record sound with the picture → You can record sound when taking still pictures. Set R to ON. g“Recording sound with still pictures” (P.103) You can also add sound to a picture that has already been taken. g“Recording sound”...

  • Page 55: If Correct Focus Cannot Be Obtained

    If correct focus cannot be obtained When the subject cannot be focused on, you can focus the camera on another point at roughly the same distance (focus lock) and take the picture as explained below. Using the Focus Lock function Position the AF target mark on the subject you want to focus •...

  • Page 56: Subjects That Are Difficult To Focus On

    If correct focus cannot be obtained Press the shutter button fully. Shutter button TIPS The frame in which you focus on a subject is different from the frame in which you lock the exposure. g“AE LOCK – Locking the exposure” (P.88) Fix the focus position.

  • Page 57: Recording Movies

    Recording movies This function allows you to record movies. If R is set to ON, sound is recorded at the same time. If you select MPEG4 for the record mode, you can record a long movie in MPEG format. g“Record mode” (P.106) Slide the power switch to n.
  • Page 58 Recording movies Press the shutter button again to stop recording. • When the remaining recording time has been used up, recording stops automatically. • When there is space in the card memory, the remaining recording time (gP.109) is displayed, and the camera is ready to shoot. TIPS To record sound at the same time →...

  • Page 59: Zoom

    Zoom In addition to the optical zoom, this camera is equipped with a super zoom and digital zoom for taking telephoto and wide-angle shots. You can increase the zoom magnification by combining the super zoom or digital zoom with the optical zoom.

  • Page 60: Super Zoom - Using The Super Zoom

    Zoom SUPER ZOOM – Using the super zoom In the top menu, select MODE Zoom lever MENU CAMERA SUPER ON, and press e. ZOOM g “How to use the menus” (P.35) • When ON is selected, the record mode is automatically set to 1600 ×...

  • Page 61: Digital Zoom - Using The Digital Zoom

    Zoom DIGITAL ZOOM – Using the digital zoom In the top menu, select MODE Zoom lever MENU CAMERA DIGITAL ON, and press e. ZOOM g “How to use the menus” (P.35) • Press e again to exit the menu. Arrow pad In the top menu, select DIGITAL ON, and press e.

  • Page 62: Flash

    4 Flash Flash shooting Select the flash mode best suited to the light conditions and the effect you want to achieve. You can also adjust the amount of light emitted using the flash intensity control. This camera is equipped with two flashes. The camera automatically selects which flash to fire depending on the zoom magnification.

  • Page 63: Take The Picture

    Flash shooting Press the shutter button halfway. mark • In conditions where the flash will fire, # F2.8 F2.8 lights. Press the shutter button fully to take the picture. 2288 1712 2288 1712 Flash working range W (max.): Approx. 0.3 m to 4.5 m (1.0 ft. to 14.8 ft.) T (max.) : Approx.
  • Page 64 Flash shooting TIPS The # (flash charge) indication blinks. → The flash is charging. Wait until # goes off. Shutter speed when using the flash (Auto-flash, red-eye reduction, fill-in flash). → When # (camera movement warning) lights, the shutter speed locks at its current level.
  • Page 65 Flash shooting Auto-flash (No indication) The flash fires automatically in low light or backlight conditions. Red-eye reduction flash (!) The light from the flash may make the subject’s eyes appear red in the picture. The red-eye reduction flash mode significantly reduces this phenomenon by emitting pre-flashes before firing the regular flash.

  • Page 66: Flash Off

    Flash shooting Flash off ($) The flash does not fire even in low light conditions. Use this mode in situations where flash photography is not desired or is prohibited. You can also use this mode when you want to shoot a natural-looking twilight or night scene. •...
  • Page 67 Flash shooting 2nd curtain (rear curtain) #SLOW2 With 2nd curtain, the flash fires just before the shutter closes. Changing the flash timing can create interesting effects in your picture, such as expressing the movement of a car by showing the tail-lights streaming backwards. The slower the shutter speed, the better the effects turn out.

  • Page 68: Using The Slow Synchronization Flash

    Using the slow synchronization flash In the top menu, select MODE #SLOW MENU CAMERA #SLOW1, HSLOW or #SLOW2, and press e. g“How to use the menus” (P.35) • Press e again to exit the menu. Arrow pad OK button SLO W1 SLO W SLO W NOISE REDUCtION...

  • Page 69: Flash Intensity Control

    Flash intensity control You can adjust the amount of light emitted by the flash. In some situations, you may get better results by adjusting the light emission. Examples include small subjects, distant backgrounds, or situations when increased contrast is desired. You can adjust the exposure in the range of ±2.0 in 1/3 EV steps.

  • Page 70: External Flash (Optional)

    External flash (optional) Using the external flash Various types of flash shooting are possible with the Olympus FL series external flashes. If the external flash is used, flash mode and exposure compensation will be detected automatically by the camera, allowing the built-in flash and external flash to function together.
  • Page 71 External flash (optional) Turn on the external flash. • Set the mode dial to TTL-AUTO. • Be sure to attach the flash to the camera before turning the flash on. Press # to set the flash mode. g“Flash shooting” (P.61) •...

  • Page 72: Using Commercially Available External Flashes

    For details on compatible commercially available external flashes, refer to the next page. The amount of light emitted cannot be adjusted on commercially available external flashes except Olympus FL series. Attach the external flash to the hot shoe and connect it to the camera.

  • Page 73: Compatible External Flashes

    (7) If a flash unit or other accessory TTL flash that has additional communications functions other than an Olympus FL series flash is used, it may not only fail to function normally, but may also cause...

  • Page 74: Advanced Shooting

    5 Advanced shooting A/S/M mode Select the shooting mode to be used when the mode dial is set to p. In the top menu, select MODE MENU CAMERA A/S/M S or M, and press e. g“How to use the menus” (P.35) •...

  • Page 75: Aperture Priority Shooting

    Aperture priority shooting Select A mode. g“A/S/M mode” (P.73) Press ac to set the aperture value. a : Increases the aperture value. c : Decreases the aperture value. If the aperture value is displayed in red, the aperture setting is unsuitable for the conditions.

  • Page 76: Shutter Priority Shooting

    Shutter priority shooting Select S mode. g“A/S/M mode” (P.73) Press ac to set the shutter speed. a : Sets a faster shutter speed. c : Sets a slower shutter speed. If the shutter speed is displayed in red, the setting is unsuitable for the conditions.

  • Page 77: Manual Shooting

    Manual shooting Select M mode. AE Lock/ Custom button g“A/S/M mode” (P.73) Use the arrow pad to set the aperture value and shutter speed. : The aperture value increases. Arrow pad : The aperture value decreases. a : Sets a faster shutter speed. c : Sets a slower shutter speed.

  • Page 78: Using My Mode

    Using My Mode When you use r mode, the settings you selected with the menus in My Mode are activated. Saving the shooting mode or function settings you want to use in advance lets you shoot with your favorite settings straightaway. You can also save the settings you are currently using.You can create and save up to 4 different patterns.

  • Page 79: Focusing Applications

    Focusing applications AF MODE – Changing the focus range This function allows you to select the focus range of your subject. iESP Focus selection is based on the entire picture on the screen. Even when the subject is not in the center of the screen, focusing is possible.

  • Page 80: Fulltime Af - A Reliable Time-Saving Way To Focus

    Focusing applications FULLTIME AF – A reliable time-saving way to focus FULLTIME AF keeps the subject in front of the lens in focus at all times, without having to press the shutter button halfway. When ON is selected, the focusing time is reduced, letting you take successive snapshots. The subject is also automatically kept in focus during movie recording.

  • Page 81: Af Area - Changing The Position Of The Af Target Mark

    Focusing applications AF AREA – Changing the position of the AF target mark You can select the area you want to focus on by changing the position of the AF target mark. Set the AF MODE to SPOT. g“AF MODE – Changing the focus range”...

  • Page 82: Af Lock - Locking The Focus

    Focusing applications AF LOCK – Locking the focus Registering the AF lock function on the x in advance enables easy locking of the focus. Register the AF lock function on AE Lock/ Custom button g“Setting the custom button” (P.150) Position the AF target mark on the subject you want to focus on and press x.
  • Page 83 Focusing applications TIPS How to save the locked focus after AF MEMORY mark shooting (AF MEMORY) F2.8 F2.8 → Hold down x for more than 1 second. The AF MEMORY mark AF MEMORY appears.When the mark appears, the locked focus is memorized. To cancel AF MEMORY, press x again.

  • Page 84: Manual Focus

    Focusing applications Manual focus If auto focus is unable to focus on a subject, use manual focus. Hold down e for more than 1 second. Arrow pad OK button When the focus distance selection screen appears on the monitor, press b to select MF. Press ac to set the focus distance.
  • Page 85 Focusing applications Hold down e for more than 1 second to save the setting. • MF is displayed in red on the monitor. Take the picture. • The focus is locked at the distance you have set. To cancel manual focus Hold down e for more than 1 second to display the focus distance selection screen.

  • Page 86: Metering

    Metering There are three ways of measuring the brightness of a subject. ESP metering Meters the center of the subject and the surrounding area separately. Spot metering Exposure is determined by metering within the AF target area. In this mode, a subject can be shot with optimal exposure regardless of the background light.

  • Page 87: Multi Metering

    Metering MULTI METERING AE Lock/ Custom button When using the camera in the A/S/M mode, multi-metering is not available in the M mode. Set to any mode except M. g“A/S/M mode” (P.73) • If a function other than AE lock is registered on x, set AE lock to the button.
  • Page 88 Metering Ex: When metering 2 points (pressing x twice) The aperture and shutter speed as calculated from the average values obtained by metering at 2 points. These values are recalculated every time another metering point is added. The average for the 2 Indicates how much the metering points.

  • Page 89: Ae Lock - Locking The Exposure

    AE LOCK – Locking the exposure This function is suitable for situations when optimal exposure is difficult to achieve, such as when there is excessive contrast between the subject and the surroundings. For example, when the sky takes up much of the frame, shooting with automatic exposure sometimes results in a dark subject.
  • Page 90 AE LOCK – Locking the exposure Position the AF target mark on the subject you want to focus on and press the shutter button halfway. • The green lamp lights. • AE lock cannot be canceled while the shutter button is pressed halfway. 2288 1712 2288 1712 Press the shutter button fully.

  • Page 91: Macro Mode Shooting

    Macro mode shooting Focusing is usually slow when you get close to a subject (W: 7 cm/2.8" to 60 cm/2.0 ft., T: 1.2 m/3.9 ft. to 2m/6.6 ft.). However, in the & mode focusing is performed quickly. When the optical zoom lever is at the maximum wide position and you are as close as 7 cm/2.8"...

  • Page 92: Super Macro Mode Shooting

    Super macro mode shooting This mode lets you shoot from as close as 3 cm/1.2" to your subject. Subjects measuring up to approximately 4 × 3 cm (1.6" × 1.2") can be captured on the monitor. In the % mode, normal shooting is also possible, but the position of the zoom is fixed automatically and cannot be changed.

  • Page 93: Self-Timer Shooting

    Self-timer shooting This function lets you take pictures using the self-timer. Fix the camera securely on a tripod for self-timer shooting. This function is useful for taking pictures where you want to be included in the photograph. Select Y by repeatedly pressing Z Self-timer/ Remote control button Shutter button...

  • Page 94: Remote Control Shooting

    Remote control shooting Shooting is possible using the remote control device provided with the camera. This is useful when you want to take a picture with yourself in it, or a night scene, without touching the camera. Mount the camera on a tripod or Z Self-timer/ Remote control button place it on a stable, flat surface.
  • Page 95 Remote control shooting TIPS The self-timer/remote control lamp does not blink after pressing the shutter button on the remote control device. → The remote control device may be too far from the camera. Move closer to the camera and press the shutter button on the remote control device again.

  • Page 96: Sequential Shooting

    Sequential shooting There are 4 sequential shooting modes: sequential shooting, high speed sequential shooting, AF sequential shooting and auto bracketing. Sequential shooting modes can be selected from the DRIVE mode menu. Sequential shooting cannot be performed when the record mode is set to TIFF. Drive mode Shoots 1 frame at a time when the shutter button is pressed.

  • Page 97: Auto Bracketing

    Sequential shooting Take the picture. • Press the shutter button fully and keep it pressed. The camera will take pictures in sequence until you release the button. DRIVE A/S/M Auto bracketing Under some conditions, you may obtain better results shooting with exposure compensation than by using the exposure setting considered optimal by the camera.
  • Page 98 Sequential shooting Select the exposure differential. Press ac to select ±0.3, ±0.7 or ±1.0, then press d. CANCEL SELECt Select the number of shots. Press ac to select ×3 or ×5, then press e. • Press e repeatedly until the menu disappears. Take the picture.

  • Page 99: Panorama - Panorama Shooting

    PANORAMA – Panorama shooting You can take advantage of panorama shooting with Olympus CAMEDIA- brand cards (xD-Picture Card). Panorama shooting lets you connect pictures with overlapping edges into a single panoramic picture, using the CAMEDIA Master software. In the top menu, select MODE...
  • Page 100 • The frame on the screen disappears and the camera returns to the normal shooting mode. • The panorama mode is only available with Olympus CAMEDIA- brand cards. • Your computer’s memory may be insufficient if you take too many Note panorama pictures in HQ or SHQ mode.

  • Page 101: In 1 - Taking Two-In-One Pictures

    2 IN 1 – Taking two-in-one pictures This function allows you to combine two pictures taken in succession and store them as a single picture. You can combine two different subjects in one picture. Picture when played back In the top menu, select MODE MENU CAMERA 2 IN 1, and...
  • Page 102 2 IN 1 – Taking two-in-one pictures • During 2 IN 1 picture shooting, the panorama and sequential shooting modes are not available. Note • To cancel the 2 IN 1 picture mode after the first shot has been taken, press e.

  • Page 103: Function - Adding Special Effects To Pictures

    FUNCTION – Adding special effects to pictures This feature lets you add special effects to your pictures during shooting. 4 effects are available. BLACK & WHITE Takes pictures in black and white. SEPIA Gives pictures a sepia tone. WHITE BOARD Pictures are in black and white, with black letters on a white background emphasized to make them easier to read.

  • Page 104: Recording Sound With Still Pictures

    Recording sound with still pictures Sound can be recorded when taking still pictures. Recording starts about 0.5 seconds after the shutter is released and lasts about 4 seconds. When this function is enabled, sound is recorded automatically every time you take a picture. In the top menu, select MODE Shutter button MENU...

  • Page 105: Recording Sound With Movies

    Recording sound with movies • If the camera is more than 1 m (3.3 ft.) away from the source of the sound, sound may not be recorded clearly by the built-in Note microphone. • Pictures cannot be taken during sound recording. •...

  • Page 106: Using Commercially Available External Microphones

    Set the camera’s sound recording function to ON to record sound. • See the following pages for details. g“Recording sound with still pictures” (P.103) g“Recording sound with movies” (P.104) g“Recording sound” (P.139) TIPS • For more details on supported external microphones, refer to the Olympus Web site. http://www.olympus.com/...

  • Page 107: Adjusting The Image Quality And Exposure

    6 Adjusting the image quality and exposure Record mode You can select a record mode in which to take pictures or shoot movies. Choose the best record mode for your purpose (printing, editing on a PC, website editing, etc.). For information on the image size for each record mode and the number of remaining pictures and remaining recording time for the card, see the table on P.108.

  • Page 108: Movie Record Modes

    Record mode Special record modes Record mode Features Resolution ENLARGE SIZE Increases the resolution. This is useful for 3200 × 2400 (SHQ, HQ) printing large-sized prints. This is useful for ordering prints from a 2288 × 1520 (TIFF, SHQ, HQ) photo lab.
  • Page 109 Record mode Record modes and the number of storable still pictures/ remaining recording time The number of storable still pictures and remaining recording time is also displayed on the monitor when a card is in the camera. 2288 1712 2288 1712 Number of storable still pictures Memory capacity in no.

  • Page 110: Selecting A Record Mode

    Record mode Movie Record Modes Seconds of remaining recording time (sec.) Record Resolution File format mode 16MB With sound Without sound MPEG4 640 × 480 (30 frames/sec.) MPEG4 46 sec. 48 sec. 640 × 480 (15 frames/sec.) 17 sec. 17 sec. 320 ×...
  • Page 111 Record mode In the top menu, press b to select K, and choose SHQ 2288 × 1712, HQ 2288 × 1712, SQ1 1280 × 960 or SQ2 640 × 480. Go to Step 4. In the top menu, press b to select K, then press ac to select DIGItAL ZOOM MPEG4, SHQ, HQ or SQ.

  • Page 112: Iso Sensitivity

    ISO sensitivity The higher the ISO value, the greater the camera’s light sensitivity and the better its ability to shoot in low light conditions. However, higher values also introduce electrical noise into the resulting image, which may give them a grainy appearance. AUTO Sensitivity is automatically adjusted according to the light conditions and the subject brightness.

  • Page 113: Exposure Compensation

    Exposure compensation This function allows you to make fine changes to the present exposure setting using the arrow pad. In some situations, you may get better results when the exposure that the camera sets is compensated (adjusted) manually. You can adjust the exposure in the range of ±2.0 in 1/3 EV steps.

  • Page 114: White Balance

    White balance Color reproduction differs depending on the light conditions. For instance, when daylight, the setting sun or tungsten lighting are reflected on white paper, the shade of white produced will be slightly different for each. By setting the WB (white balance), you can achieve more natural-looking colors. In the top menu, select MODE MENU PICTURE...

  • Page 115: Preset White Balance

    White balance Preset white balance Select a preset white balance setting according to the type of light. Press ac to select one of the following settings, then press e. Press e again to exit the menu. PRESEt WB For shooting on a sunny day. For shooting on a cloudy day.
  • Page 116 White balance Press e. • The white balance is set and the screen returns to the mode menu. • To cancel one-touch white balance, press b. button 2288 1712 2288 1712 One-touch white balance Press e repeatedly until the menu disappears. •...

  • Page 117: White Balance Adjustment

    White balance White balance adjustment This function lets you make fine changes to the current white balance setting. In the top menu, select MODE >, and MENU PICTURE press d. g“How to use the menus” (P.35) • The white balance adjustment indicator appears on the screen.

  • Page 118: Sharpness

    SHARPNESS This function adjusts the sharpness of the image. In the top menu, select MODE MENU PICTURE SHARPNESS, and press d. g“How to use the menus” (P.35) Arrow pad OK button Press ac to adjust the sharpness between +5 and -5. •...

  • Page 119: Contrast

    CONTRAST This function adjusts the contrast of images. For example, you can make images with marked differences in light and shadow softer, and those with less differences more vivid. In the top menu, select MODE MENU PICTURE CONTRAST, and press d. g“How to use the menus”...

  • Page 120: Saturation

    SATURATION This function adjusts the color depth. In the top menu, select MODE MENU PICTURE SATURATION, and press d. g“How to use the menus” (P.35) Arrow pad OK button Press ac to adjust the saturation between +5 and -5. SAtURAtION •...

  • Page 121: Noise Reduction

    NOISE REDUCTION This function reduces the noise that is generated during long exposures. When shooting night scenes, shutter speeds become slower and noise tends to appear on images. When noise reduction is set to ON, the camera automatically reduces noise to produce clearer images. However, shooting time is approximately twice as long as usual.

  • Page 122: Reduce Flicker

    REDUCE FLICKER This function reduces the flickering that may appear on the monitor when recording movies under fluorescent light. In the top menu, select MODE MENU CAMERA REDUCE ON, and press e. FLICKER g“How to use the menus” (P.35) • Press e again to exit the menu. Arrow pad OK button •...

  • Page 123: Histogram Display

    Histogram display During shooting and playback of still pictures, you can display a histogram showing the brightness and contrast of your subject in the viewfinder or monitor. Checking the histogram enables precise exposure control when taking pictures. During playback, you can display a histogram showing the brightness and contrast of recorded pictures.
  • Page 124 Histogram display In the top menu, select MODE MENU CAMERA ON or OFF, and press e. g“How to use the menus” (P.35) Arrow pad OK button In the top menu, select MODE MENU PLAY ON or OFF, and press e. g“How to use the menus”...

  • Page 125: Playback

    7 Playback Viewing still pictures Slide the power switch to q. Power switch g“Power on/off” (P.25) Mode dial • The monitor turns on and displays the last picture taken. (Single-frame playback) Arrow pad Use the arrow pad to play back other pictures. Jumps to the picture 10 frames back.

  • Page 126: Quick View

    Viewing still pictures QUICK VIEW This function lets you play back pictures while the camera is in the shooting mode. This is useful when you want to check shooting results and resume shooting quickly. Functions available in normal playback mode are also available in QUICK VIEW.

  • Page 127: Close-Up Playback

    Close-up playback Pictures displayed on the monitor can be enlarged 1.5, 2, 2.5, 3, 3.5 or 4 times. Select the still picture you want to Zoom lever enlarge. • You cannot enlarge pictures with n. Pull the zoom lever toward T ( •...

  • Page 128: Index Display

    Index display This function lets you show several pictures at the same time on the monitor. The number of pictures shown can be 4, 9 or 16. g“Selecting the number of pictures” (P.128) In the single-frame playback mode, push the zoom lever toward W (G). •...

  • Page 129: Selecting The Number Of Pictures

    Index display Selecting the number of pictures This function lets you select the number of pictures in an index display from 4, 9 and 16. In the top menu, select MODE MENU SETUP 4, 9 or 16, and press e. •...

  • Page 130: Slideshow

    Slideshow This function displays still pictures stored in the card one after another. Only the first frame of movies is played back. Select a still picture, then press e to display the top menu. a button e button Press a to start the slideshow. INFO MODE MENU SWItCH FRAME...

  • Page 131: Viewing Movies

    Viewing movies This function lets you play back movies. You can fast forward the movie, play it back one frame at a time or save selected frames as still pictures (capture, MPEG4/SHQ only). Use the arrow pad to display the picture with n you want to play back.
  • Page 132 Viewing movies The following operations can be performed during movie playback. H appears on movies that have sound recorded. Pressing ac lets you adjust the sound volume during playback. a : Increases the volume. c : Reduces the volume. 00:30/00:36 00:30/00:36 : Plays the movie at double the normal speed.
  • Page 133 Viewing movies If you selected CAPTURE Play back the movie one frame at a MOVIE%PLAYBACK time until the frame you want to save PLAYBACK as a still picture is displayed. FRAME%BY%FRAME Press e. CAPtURE Press ac to select CAPTURE, then EXIt press e.

  • Page 134: Editing Movies

    Editing movies This function lets you create indexes as well as edit movies. However, you cannot edit movies longer than the following: Movies without sound: Approx. 80 sec. in MPEG4 mode. Approx. 20 sec. in SHQ mode. Approx. 70 sec. in HQ mode. Approx.
  • Page 135 Editing movies Use the arrow pad to select the first 00:00 00:00 00:00 00:36 00:36 00:36 frame of the index and press e. a : Jumps to the first frame of the movie. c : Jumps to the last frame of the movie. : Displays the next frame.

  • Page 136: Edit - Editing A Movie

    Editing movies • The interval between the frames that are automatically picked out varies depending on the length of the movie. Note • An index consists of 9 frames. • You cannot create an index if there is insufficient memory space on the card.
  • Page 137 Editing movies Press ac to select OK, then EDIt press e. • If you want to select different frames, select RESET and press e and repeat RESEt the procedure from Step 4. CANCEL • To quit the editing function, select SELECt CANCEL and press e.

  • Page 138: Playback On Tv

    Playback on TV Use the AV cable provided with the camera to play back recorded images on your TV. You can play back both still pictures and movies on your TV. Make sure that the TV and camera are turned off. Connect the A/V OUT jack on the camera to the Video input terminal on the TV using the AV cable.

  • Page 139: Picture Rotation

    Playback on TV • When pictures are compressed in order to fit the entire picture on the TV screen, a black frame may appear around the picture. If the picture is output to a video printer via the TV, the black frame may be printed. Picture rotation Pictures taken with the camera held vertically are displayed horizontally.

  • Page 140: Recording Sound

    Recording sound Sound can be added to a still picture that you have already taken. (This is known as “after-recording”.) You can also re-record over the sound that has already been recorded. Total recording time per picture is approximately 4 seconds. Use the arrow pad to select the still picture you want to add sound to.

  • Page 141: Editing Still Pictures

    Editing still pictures This function lets you edit still pictures and store them as new pictures. The following editing operations are possible. Resizing Q Changes the picture size to 640 × 480 or 320 × 240 and stores the picture as a new file. Trimming P Crops part of a picture and saves it as a new file.

  • Page 142: Trimming

    Editing still pictures Trimming Select P, then press d. Press ac to select P, then press e. CANCEL EXIt SELECt Use the arrow pad and zoom lever to decide the trimming position and size. • Press acbd to move the trimming frame.
  • Page 143 Editing still pictures • Trimming is not possible in the following cases. Movies, when there is insufficient memory space on the card, or Note when the picture was taken with the record mode set to ENLARGE SIZE • It may not be possible to trim pictures taken with another camera. •...

  • Page 144: Protecting Pictures

    Protecting pictures You are recommended to protect important pictures to avoid accidentally erasing them. You can play back only protected pictures. g“SWITCH FRAME – Playing back only protected pictures” (P.144) Protected pictures cannot be erased by the single-frame/all-frame erase function. Use the arrow pad to display the 0 Protect button picture you want to protect.

  • Page 145: Switch Frame - Playing Back Only Protected Pictures

    SWITCH FRAME – Playing back only protected pictures You can play back only protected pictures. This can be used to separately manage pictures taken as a travel memo and separate those pictures you want to show to others. All pictures are played back. Only protected pictures are played back.

  • Page 146: Erasing Pictures

    Erasing pictures This function erases recorded pictures. Pictures can be erased either one frame at a time or all the pictures in the card. • You cannot erase protected pictures. Cancel protection before erasing such pictures. Note • Pictures played back with 0 cannot be deleted.g“SWITCH FRAME –...

  • Page 147: All-Frame Erase

    Erasing pictures All-frame erase This function erases all the pictures on the card. In the top menu, select MODE MENU CARD CARD SETUP and press d. g“How to use the menus” (P.35) Arrow pad OK button Press ac to select R ALL CARD%SEtUP ERASE, then press e.

  • Page 148: Useful Functions

    8 Useful functions ALL RESET – Saving the camera’s settings This function lets you choose whether or not to save the current camera settings after the power is turned off. The settings affected by ALL RESET are listed on the next page. The All Reset setting (ON/OFF) applies to all the modes.
  • Page 149 ALL RESET – Saving the camera’s settings Functions that All Reset ON setting affects Factory Factory Ref. Ref. Function default Function default Page Page setting setting F No F2.8 P.74 AF MODE iESP P.78 R (still pictures) OFF SHUTTER 1/1000 P.75 P.103 R (movies)

  • Page 150: Custom Button

    CUSTOM BUTTON Functions listed in the table below can be assigned to the custom button on the camera. AE Lock/ Custom button This makes it easy to jump to frequently used functions simply by pressing the custom button without having to select a shortcut menu or MODE MENU from the top menu.

  • Page 151: Setting The Custom Button

    CUSTOM BUTTON Setting the custom button In the top menu, select MODE MENU SETUP CUSTOM BUTTON, and press d. g“How to use the menus” (P.35) Arrow pad OK button Press ac to select a function, CUStOM BUttON then press e. AE LOCK •...

  • Page 152: Using The Custom Button

    CUSTOM BUTTON Using the custom button Press x. AE Lock/ Custom button • The monitor turns on and the function currently set to the custom button appears. Ex: When DRIVE is set on the custom button Set by repeatedly pressing the HQ 2288 2288 1712 1712...

  • Page 153: Short Cut

    SHORT CUT You can set three shortcut menus (A, B, C) on the top menu in K mode (except h). This is useful when you want to go quickly to frequently used functions. MODE MENU Default setting A: ESP/ 5 B: K C: &...

  • Page 154: Setting The Shortcut Menu

    SHORT CUT Setting the shortcut menu You can set the three shortcut menus designated by A, B and C on the diagram shown right. MODE MENU In the top menu, select MODE MENU SETUP SHORT CUT, and press d. g“How to use the menus” (P.35) Arrow pad OK button Press ac to select A, B or C,...

  • Page 155: Using The Shortcut Menu

    SHORT CUT Using the shortcut menu When you have set a shortcut menu, you can use it to jump to the setting screen for that function. Press e to display the top menu. • The shortcut menu you have set appears on the top menu.

  • Page 156: My Mode Setup

    MY MODE SETUP You can set shooting-related functions in MY MODE. When the camera is in P, A, S or M mode, you can also save the current settings in MY MODE. When the mode dial is set to r, your customized settings are activated. You can save up to 4 different settings in MY MODE 1 to 4.
  • Page 157 MY MODE SETUP In the top menu, select MODE MENU SETUP MY MODE SETUP, and press d. g“How to use the menus” (P.35) Arrow pad OK button Press ac to select the type of setting, then press d. CURRENt MY MODE SEtUP FILE NAME RESEt CURRENT...
  • Page 158 MY MODE SETUP When selecting RESET in Step 2 Press ac to select ALL RESET, MY MODE SEtUP then press e. RESEt PRESENt SEttING • The settings in the selected MY MODE are reset. ALL RESEt If no settings are saved, MY MODE CANCEL settings cannot be selected.

  • Page 159: Card Setup - Formatting Cards

    CARD SETUP – Formatting cards This function lets you format a card. Formatting prepares cards to receive data. Before using non-Olympus cards or cards which have been formatted on a PC, you must format them with this camera. All existing data, including protected pictures, are erased when the card is formatted.
  • Page 160 CARD SETUP – Formatting cards Press a to select YES, then press FORMAt CAUtION ERASING%ALL • The BUSY bar is displayed and the card is formatted. SELECt BUSY • Never do the following during formatting, as they may cause the card to malfunction.

  • Page 161: Information Display

    Information display This function lets you display detailed shooting information on the monitor for approx. 3 seconds in the playback mode. For details of the information displayed, see “Viewfinder and monitor indications” (P.14). In the top menu, select MODE MENU CAMERA INFO or OFF, and press e.

  • Page 162: Monitor/Viewfinder Brightness Adjustment

    Monitor/viewfinder brightness adjustment This function lets you adjust the brightness of the monitor and viewfinder respectively. In the top menu, select MODE s, and press MENU SETUP g“How to use the menus” (P.35) Arrow pad OK button Press ac to adjust the brightness while looking in the monitor or viewfinder, and when you have set the desired level,...

  • Page 163: Rec View

    REC VIEW You can choose whether or not to display the picture you have just taken on the monitor. The picture being recorded to the card is displayed. This is useful for making a brief check of the picture you have just taken. Pressing the shutter button halfway during Rec View lets you resume shooting immediately.

  • Page 164: Sleep - Sleep Timer

    SLEEP – Sleep Timer The camera automatically enters the sleep mode and stops the operation when the preset time has elapsed with no operations performed. The camera activates again as soon as you touch the shutter button or arrow pad. In the top menu, select MODE MENU SETUP...

  • Page 165: Beep

    Beep You can set the kind of beep sound used for button operations or warnings. You can also set the volume of each kind of sound to LOW or HIGH. You can turn the sound off completely by setting OFF. In the top menu, select MODE 8, and press MENU...

  • Page 166: Shutter Sound

    SHUTTER SOUND You can select from 2 kinds of sound for the shutter button. You can also set the volume of each kind of sound to LOW or HIGH. You can turn the sound off completely by setting OFF. In the top menu, select MODE MENU SETUP SHUTTER...

  • Page 167: Volume - Playback Volume

    VOLUME – Playback volume You can adjust the volume when playing back a still picture with sound or a movie, as well as the volume of the sound generated when the power is turned on or off. There are 5 levels to choose from. In the top menu, select MODE MENU SETUP...

  • Page 168: Power On/Off Setup - Power On/Off Display/Sound Setting

    POWER ON/OFF SETUP – Power on/off display/sound setting You can select a picture and/or sound to be displayed/output when the power is turned on and off. It is also possible to register your favorite picture. g“SCREEN SETUP” (P.168) In the top menu, select MODE MENU SETUP PW ON/OFF...

  • Page 169: Screen Setup

    SCREEN SETUP You can register your favorite picture to be displayed when the power is turned on and off. The desired picture can be registered from the card. Make the POWER ON/OFF SETUP to display the registered picture. g“POWER ON/OFF SETUP – Power on/off display/sound setting” (P.167) In the top menu, select MODE MENU SETUP...

  • Page 170: File Name

    FILE NAME The camera automatically creates file names and folder names for images to be stored in. Files can be numbered from 0001 to 9999 and folders can be numbered from 100 to 999. Examples are shown below. Folder name File name \ D C I M \ * * * O L Y M P \ P m d d * * * * .

  • Page 171: Pixel Mapping

    PIXEL MAPPING • When the File No. reaches 9999, the file number returns to 0001 and the folder number changes. • When both the Folder and File No. reach their respective maximum number Note (999/9999), the number of storable pictures becomes 0 even if the card is not full.

  • Page 172: Measurement Units

    Measurement units The measurement unit can be selected from either meters or feet in the manual focus mode. At long ranges, the camera measures in meters, and at shorts ranges in centimeters. At long ranges, the camera measures in feet, and at short ranges in inches.

  • Page 173: Video Out - Video Output Selection

    VIDEO OUT – Video output selection You can select NTSC or PAL according to your TV’s video signal type. When playing back pictures while connected to a TV in a foreign country, be sure to set the VIDEO OUT setting accordingly. Select the video signal type before connecting the AV cable.

  • Page 174: Print Setting (Dpof)

    9 Print setting (DPOF) How to print pictures Print reservation allows you to save printing data (the number of prints and the date/time information) with the pictures stored on the card. With print reservation, you can print out pictures easily either at home using a personal DPOF-compatible printer or at a print shop that supports DPOF.
  • Page 175 How to print pictures TIPS Picture size and printing The resolution of a computer/printer is generally based on the number of dots (pixels) per square inch. This is called dpi (dots per inch). The higher the dpi value, the better the printed results. Keep in mind, however, that the dpi of the picture does not change.

  • Page 176: All-Frame Reservation

    All-frame reservation Use this feature to print all the pictures stored on the card. Select the desired number of prints and whether you want the date and time included. Play back a still picture. g“Viewing still pictures” (P.124) • You cannot make the print reservation for pictures with n.
  • Page 177 All-frame reservation Perform each setting as illustrated. Select <×. SELECt SELECt DAtE tIME SELECt Select X. Set the number of prints Press ac to set the number of prints, then press e. a : Increases the number. c : Decreases the number. Set the date/time printing data Press ac to select NO, DATE or TIME, then press e.

  • Page 178: Single-Frame Reservation

    Single-frame reservation Use this feature to print only selected pictures. Display the picture to be printed and select the desired number of prints. Play back a still picture. g“Viewing still pictures” (P.124) • You cannot make the print reservation for pictures with n.
  • Page 179 Single-frame reservation Select the appropriate item using the arrow pad. SINGLE PRINt MORE Sets the number of prints, MORE date/time and trim size. The print reservation data CANCEL is set and the screen proceeds to Step 6. Single-frame reservation menu SINGLE PRINT Sets single-frame print.
  • Page 180 Single-frame reservation Trim the picture g“Trimming” (P.180) After setting the number of prints and date/time printing data and trimming the picture, press e to complete the print reservations and return to the screen in Step 4. '04.06.10 '04.06.10 12:30 16 12:30 16 •...

  • Page 181: Trimming

    Trimming This function enables you to crop part of a recorded picture and print out the enlarged section only. Press ac on the single-frame reservation screen to select P (trimming) and press d. g“Single-frame reservation” (P.177) • If trimming has already been set, the P screen appears.
  • Page 182 Trimming Press ac to select OK, then press e. Saves the current trimming size and returns to the single-frame RESEt reservation screen. CANCEL RESET Sets a new trimming size. SELECt to Step 2. CANCEL Cancels the current trimming setting and returns to the single-frame reservation screen. Press e to complete the print reservations and return to the picture selection screen.

  • Page 183: Resetting Print Reservation Data

    Resetting print reservation data This function allows you to reset the print reservation data for pictures stored on the card. You can reset all the print reservation data or just for selected pictures. To reset the print reservation data for all the pictures In the top menu, select MODE <, and press d.
  • Page 184 Resetting print reservation data To reset the print reservation data for a selected picture <, and In the top menu, select MODE MENU PLAY press d. g“How to use the menus” (P.35) Press ac to select KEEP, then PRINt%ORDER%SEttING press e. PRINt%ORDERED •...

  • Page 185: Direct Printing (Pictbridge)

    10 Direct printing (PictBridge) Using the direct printing function By connecting the camera to a PictBridge-compatible printer with the USB cable, you can print out recorded pictures directly. With the camera connected to the printer, select the pictures you want to print and the number of prints on the camera’s monitor.

  • Page 186: Connecting The Camera To A Printer

    Connecting the camera to a printer Use the USB cable provided to connect the camera to a PictBridge- compatible printer. Turn the printer on and plug the printer end of the USB cable into the printer’s USB port. • For details of how to turn the printer on and the position of the USB port, refer to the printer’s instruction manual.

  • Page 187: Printing Pictures

    Printing pictures When the camera is connected to a PictBridge- compatible printer, the PRINT MODE SELECT screen is displayed on the monitor. Use this screen to select the print mode. You can choose from the following print modes. EXIt SELECt PRINT MODE SELECT screen PRINT...

  • Page 188: Easy Printing

    Printing pictures Easy printing The method described below is the easiest way to print out pictures. The selected picture is printed without the date, time or file name. In the PRINT MODE SELECT screen (P.186), press ac to select PRINT, then press e. •...
  • Page 189 Printing pictures Press ac to select OK, then PRINt press e. • Printing starts. • To cancel printing, select CANCEL and press e. The PRINT MODE SELECT CANCEL screen is displayed. CANCEL SELECt • When printing is finished, the screen returns to Step 4.

  • Page 190: Print Mode/Multi Print Mode

    Printing pictures PRINT mode/MULTI PRINT mode In the PRINT MODE SELECT Zoom lever screen, press ac to select PRINT or MULTI PRINT, then press e. • The PRINT PAPER screen is displayed. Arrow pad OK button Press ac to select the paper PRINt PAPER size, then press d.
  • Page 191 Printing pictures Press bd to select the picture you want to print. • Turn the zoom lever toward W to display the pictures in index format. You can also select the pictures you want to print from the index. SELECt PRINt SINGLE PRINt MORE...
  • Page 192 Printing pictures Set MORE print reservations Press c. • Print information settings screen is displayed. Press ac to select the item you want to set, then press d. • Press ac to select the item, then WItHOUt WItHOUt press e. WItHOUt WItHOUt FILE NAME...
  • Page 193 Printing pictures Print the pictures. PRINt • Press ac to select OK or CANCEL, then press e. CANCEL Printing starts. CANCEL The settings are canceled and CANCEL SELECt the monitor returns to the PRINT MODE SELECT screen. • When printing is finished, the monitor returns to the PRINT MODE SELECT screen.

  • Page 194: All Print Mode

    Printing pictures ALL PRINT mode In the PRINT MODE SELECT screen, press ac to select ALL PRINT, then press e. • The PRINT PAPER screen is displayed. EXIt SELECt Press ac to select the paper PRINt PAPER size, then press d. SIZE BORDERLESS •...
  • Page 195 Printing pictures Print the pictures. PRINt • Press ac to select OK or CANCEL, then press e. CANCEL Printing starts. CANCEL The settings are canceled and CANCEL SELECt the monitor returns to the PRINT MODE SELECT screen. • When printing is finished, the monitor returns to the PRINT MODE SELECT screen.

  • Page 196: All Index Mode/Print Order Mode

    Printing pictures ALL INDEX mode/PRINT ORDER mode In the PRINT MODE SELECT screen, press ac to select ALL INDEX or PRINT ORDER, then press e. • The PRINT PAPER screen is displayed. EXIt SELECt Press ac to select the paper PRINt PAPER size, then press d.
  • Page 197 Printing pictures Print the pictures. PRINt • Press ac to select OK or CANCEL, then press e. Printing starts. CANCEL The settings are canceled and CANCEL the monitor returns to the PRINT MODE SELECT CANCEL SELECt screen. • When printing is finished, the monitor returns to the PRINT MODE SELECT screen.

  • Page 198: Trim The Picture

    Printing pictures Trim the picture To set the trim by MORE in PRINT or MULTI PRINT mode (P.189), follow the procedure below. Use the arrow pad and zoom lever Zoom lever to select the trimming position and size. • Press acbd to move the trimming frame.

  • Page 199: Exiting Direct Printing

    Exiting direct printing When you have finished printing, disconnect the camera from the printer. In the PRINT MODE SELECT screen, select b. EXIt SELECt • The message is displayed. TURN OFF THE POWER Slide the power switch to OFF to turn the camera off.

  • Page 200: If An Error Code Is Displayed

    If an error code is displayed If an error code appears on the camera’s monitor during direct print setting or printing, see the following table. For more details, refer to the printer’s instruction manual. Monitor indication Possible cause Corrective action The camera is not Disconnect the camera connected to the printer...

  • Page 201: 11 Miscellaneous

    11 Miscellaneous Error codes Monitor Possible cause Corrective action indication The card is not inserted, Insert a card or insert a different card. or it cannot be recognized. If the problem persists, format the card. If the card cannot be formatted, it cannot NO CARD be used.

  • Page 202: Troubleshooting

    Troubleshooting Preparatory operations Possible cause Corrective action Ref. page The camera does not turn on or function buttons do not respond. Slide the power switch to K or n to turn the The power is off. P.25 camera on. The battery is exhausted. Charge the battery.
  • Page 203 Troubleshooting Possible cause Corrective action Ref. page The viewfinder does not turn on. Press f to turn the viewfinder on. The monitor is turned on. P.51 The monitor does not turn on. Press f to turn the monitor on. The viewfinder is turned P.51 The viewfinder or monitor is hard to see.
  • Page 204 Troubleshooting Possible cause Corrective action Ref. page The picture is out of focus. The subject was too Move further away from the subject. To take P.90, 91 close. pictures closer than 7 cm (2.8") with the zoom in the maximum WIDE position, use the super macro mode.
  • Page 205 Troubleshooting Possible cause Corrective action Ref. page The flash does not fire. The flash was closed. Press the flash button to make the flash pop P.61 The subject is If you want the flash to fire on a brightly P.61 illuminated.
  • Page 206 Troubleshooting Playback of recorded images Possible cause Corrective action Ref. page The picture is out of focus. A subject unsuited to AF Use manual focus or focus lock to focus on P.83, 54 was taken. the subject and then shoot. The camera moved when Hold the camera correctly and press the P.33...
  • Page 207 Troubleshooting Possible cause Corrective action Ref. page The picture is too dark. The flash was blocked by Hold the camera correctly, keeping your P.33 your finger. fingers away from the flash. The subject was out of Shoot within the flash working range. P.62 the working range of the flash.
  • Page 208 Troubleshooting Possible cause Corrective action Ref. page Halation produces unnatural colors in the picture. This may be caused by • Use a UV filter. As this may upset the — excessively bright overall color balance, it should only be ultraviolet light on the used in the conditions described on the left.
  • Page 209 Troubleshooting When the camera is connected to a PC or printer. Possible cause Corrective action Ref. page The printer fails to connect. PC was selected on the Remove the USB cable, and start again from P.185 monitor after connecting step 1 of “Connecting the camera to a to the printer with a USB printer”.

  • Page 210: List Of Factory Default Settings

    List of factory default settings The functions are set as follows when the camera leaves the factory. Shooting mode F No F2.8 SHUTTER 1/1000 Zoom 38mm K : AUTO (S, M: #SLOW) FLASH n : $ AF/MF & DRIVE ±1.0 EV, 3 AUTO (A, S, M: 64) r1/2/3/4 MY MODE 1...
  • Page 211 List of factory default settings R (still pictures) R (movies) SUPER ZOOM K : HQ (2288 × 1712) n : MPEG4 (640 × 480) TIFF 2288 × 1712 2288 × 1712 2288 × 1712 1280 × 960 NORMAL 640 × 480 NORMAL AUTO >...
  • Page 212 List of factory default settings Playback mode SWITCH FRAME INFO 0° < VOLUME Others ALL RESET ENGLISH PW ON/OFF SETUP NORMAL Y-M-D 2004.01.01 00:00 VIDEO OUT NTSC or PAL* 1-LOW Settings differ according to the region where the camera is sold.

  • Page 213: Modes And Shooting Functions

    Modes and Shooting Functions In r mode, available functions vary depending on the modes set in the MY MODE SETUP menu. Mode Function — — Zoom DIGITAL ZOOM — SUPER ZOOM — — AF MODE — — FULLTIME AF — AF AREA —...
  • Page 214 Modes and Shooting Functions Mode Function — — — PANORAMA — — — 2 IN 1 — — BLACK&WHITE — SEPIA — WHITE BOARD — — BLACK BOARD — — R (still pictures) — — R (movies) — — — —...
  • Page 215 Modes and Shooting Functions Mode Function MY MODE SETUP — — FILE NAME — PIXEL MAPPING — — m/ft — — VIDEO OUT — SHORT CUT — — CUSTOM BUTTON — — — SHUTTER SOUND — — : Available — : Not available Cannot be selected in mode.

  • Page 216: Camera Maintenance

    Camera maintenance After use Turn off the camera and fit the lens cap on the lens. If you do not intend to use the camera for a long period, remove the battery. Cleaning the camera Turn off the camera. ( P.25) Remove the battery.

  • Page 217: How To Replace The Battery (Cr2025) Of The Remote Control Device

    Camera maintenance How to replace the battery (CR2025) of the remote control device Turn the screw on the bottom of the remote control device counterclockwise to loosen. Turn the remote control device over, and remove the cover. With the battery facing up, remove the old battery and insert a new battery (CR2025) as shown.

  • Page 218: Specifications

    Image pickup device : 1/2.5" CCD solid-state image pickup, 4,110,000 pixels (gross) Lens : Olympus lens 6.3 mm to 63 mm, f2.8 to f3.7, 11 elements in 7 groups (equivalent to 38 mm to 380 mm lens on a 35 mm...
  • Page 219 -20°C to 60°C (-4°F to 140°F) (storage) Humidity : 30% to 90% (operation) /10% to 90% (storage) Power supply : Only an Olympus LI-10B lithium-ion battery AC adapter specified by Olympus (optional) Dimensions : 104.5 mm (W) × 60 mm (H) × 68.5 mm (D) (4.1"...

  • Page 220: Glossary Of Terms

    Glossary of terms A (Aperture Priority) Mode You set the aperture yourself and the camera automatically varies the shutter speed so that the picture is taken with the best exposure. AE (Automatic Exposure) The camera automatically sets the exposure. The 3 AE modes available on this camera are P mode, in which the camera selects both the aperture and shutter speed, A mode, in which the user selects the aperture and the camera sets the shutter speed, and S mode, in which the user selects the...

  • Page 221: Light Metering

    Glossary of terms Eclipsing (Vignetting) This refers to when an object obscures part of the field of view so that the whole subject is not photographed. Vignetting also refers to when the image seen through the viewfinder does not exactly match the image shot through the objective lens, so the photographed image includes objects not seen through the viewfinder.

  • Page 222: Sleep Mode

    Glossary of terms MPEG (Motion Picture Experts Group) A compression format for movies. When the record mode is set to MPEG4, movies are recorded in MPEG4 format. The recording speed of 30 frames per second produces high quality movies. NTSC (National Television Systems Committee) / PAL (Phase Alternating Line) Television formats.
  • Page 223 Glossary of terms TFT (Thin-Film Transistor) Color Monitor A transistor color monitor constructed using thin-film technology. TIFF (Tagged Image File Format) A format used for saving highly detailed black and white or color image data. TIFF image files can be handled by software programs for scanners and graphics applications.

  • Page 224: List Of Menus

    List of menus K mode (h) Top menu Setting Ref. Page o, j, i, k DRIVE P.95 SHQ 2288 × 1712, HQ 2288 × 1712, P.106 SQ1 1280 × 960, SQ2 640 × 480 P.30 CARD SETUP YES, NO P.158...
  • Page 225 List of menus K mode (i/j/k/l/m/o/r/p/P) Top menu Function Setting Ref. Page ESP, 5, MULTI MODE MENU CAMERA ESP/5 P.85,86 & OFF, &, % P.90,91 o, j, i, DRIVE P.95 k, 7 AUTO, 64, 100, 200, P.111 A/S/M A/S/M P.73 r1/2/3/4 MY MODE 1 –...
  • Page 226 List of menus K mode (i/j/k/l/m/o/r/p/P) Top menu Function Setting Ref. Page MODE MENU SETUP ALL RESET OFF, ON P.147 ENGLISH, P.28 FRANCAIS, DEUTSCH, ESPAÑOL, ITALIANO, РУССКИЙ, PORTUGUES, PW ON/OFF SETUP OFF, 1, 2 P.167 REC VIEW OFF, ON P.162 SLEEP 30 SEC, 1 MIN, 3 P.163...
  • Page 227 List of menus n mode Top menu Function Setting Ref. Page ESP/ 5 ESP, 5 MODE MENU CAMERA P.85 & OFF, &, % P.90,91 AUTO, 64, 100, 200, P.111 FULLTIME AF OFF, ON P.79 FUNCTION OFF, BLACK & P.102 WHITE, SEPIA OFF, ON P.104 REDUCE FLICKER...
  • Page 228 List of menus q mode (still pictures) Top menu Function Setting Ref. Page < MODE MENU PLAY P.173 OFF, ON P.122 START P.139 EDIT 640 × 480, P.140 320 × 240, CANCEL NEW FILE, CANCEL P.141 CARD CARD SETUP ALL ERASE, P.146, FORMAT SETUP...
  • Page 229 List of menus q mode (movies) Top menu Function Setting Ref. Page MODE MENU CARD CARD SETUP ALL ERASE, P.146, FORMAT SETUP ALL RESET OFF, ON P.147 ENGLISH, P.28 FRANCAIS, DEUTSCH, ESPAÑOL, ITALIANO, РУССКИЙ, PORTUGUES, PW ON/OFF SETUP OFF, 1, 2 P.167 P.161 P.30...

  • Page 230: Index

    Index 0 ..... . 144 Battery compartment/card 1st curtain # SLOW1..65 cover .
  • Page 231 Index EV ..... . . 220 Exposure ....88, 220 iESP .
  • Page 232 Index MY MODE SETUP r ..155 REC VIEW ....162 Record mode K ... .106 Night Scene shooting m .
  • Page 233 Index Single-frame reservation < . . . 177 White balance adjustment Single-frame shooting o ..95 > ....116 SLEEP ....163 WHITE BOARD .
  • Page 234 Our phone customer support is available from 8 am to 10 pm (Monday to Friday) ET E-Mail: distec@olympus.com Olympus software updates can be obtained at: http://www.olympus.com/digital Olympus Europa GmbH Premises/Goods delivery: Wendenstrasse 14-18, 20097 Hamburg, Germany Tel: +49 40-23 77 3-0 / Fax: +49 40-23 07 61...
  • Page 235 How to use your PC to get the most from images taken with your digital camera. Thank you for purchasing an Olympus digital camera. This manual provides instructions on how to install the USB driver. To ensure correct installation, refer only to these...
  • Page 236 Introduction This manual explains in detail how to connect your Olympus digital camera to a computer. Read it carefully and keep it in a safe place for future reference. About this manual The information contained in this manual may be subject to change without notice.
  • Page 237 INDEX Flowchart ......4 Identifying the OS ....6 Windows (98/Me/2000/XP) .
  • Page 238 Some OS’s (operating systems) may need a special setup before connecting to the camera for the first time. Follow the chart below. For details, see the Olympus Corporate Site or phone customer support. Identifying the OS (p.6) Windows 98/ MacOS 9.0 - 9.2/OS X...
  • Page 239 Flowchart • When connecting the camera to the computer, make sure that there is sufficient remaining battery power. When connected (transmitting) to the computer, the camera does not enter the sleep mode nor will the camera’s power turn off automatically. Depending on the camera model, when the battery power runs out or the internal temperature rises, the camera may stop operating automatically.
  • Page 240 Identifying the OS Identify the OS on your computer before connecting the camera. How to identify the OS depends on the computer. Windows Double-click the “My Computer” icon on your desktop. When the “My computer” icon is not on your desktop, click “Control Panel” from the “Start”...
  • Page 241 Identifying the OS A System Properties window will appear. Note and record the “System:” information. Confirm that your system is Windows 98, 98 SE, Me, 2000 Professional or Windows XP, then press “OK” to close the window. If your OS is Windows 98/98 SE, proceed to “Installing the USB driver for Windows 98”...
  • Page 242 Windows Using Windows 98/Me/2000/XP Make sure that: Your computer is turned on and Windows is running. If you are running any applications, quit them all. You are recommended to power the camera using the optional AC adapter. If the battery power runs out while the computer is accessing the card in the camera, the camera will turn off in the middle of the operation and this could destroy image files (data).

  • Page 243: Installing The Usb Driver For Windows 98 (When Using Windows 98/98 Se)

    Proceed to “Connecting the camera to the computer” ( p.11). Insert the provided software CD into your CD-ROM drive. The Olympus Windows Installer should automatically launch. Click “USB Driver”. If the USB driver is already installed in your computer, this option will not appear.
  • Page 244 USB driver will start. Click “OK” to restart your computer and the installation is complete. When the computer has restarted, installation is complete. If the Olympus Windows Installer screen appears, click “Close” and remove the CD-ROM from the CD-ROM drive.

  • Page 245: Connecting The Camera To The Computer

    Connecting the camera to the computer Users running Windows 98/98SE need to install the USB drive before connecting the camera to your computer for the first time. ( p.9) Some camera models have a “USB” setting in the menu. Make sure that “PC” is selected before connecting.
  • Page 246 Connecting the camera to the computer Turn the camera on in Lens barrier (playback) mode. • Most cameras with a lens barrier turn on automatically in Step 3, with the exception of some button or models which require you to press button (monitor) button or button.
  • Page 247 You may also select “take no action” to bypass the Microsoft Scanner and Camera Wizard. You may then use a more advanced image viewing/editing program such as Olympus CAMEDIA Master software. For detailed instructions on downloading, refer to the CAMEDIA Master software user’s guide.

  • Page 248: Confirming The Computer Recognizes The Camera

    Confirming the computer recognizes the camera Double-click the “My Computer” icon on the desktop. For users running Windows XP, click “My Computer” from the “Start” menu. Make sure the “Removable Disk” icon appears in the window. There may already be other “Removable Disk”...

  • Page 249: Confirming The Usb Driver Is Installed

    Confirming the USB driver is installed If the computer does not recognize the camera as a Removable Disk, follow the procedure below to check whether the USB driver has been fully installed. Open “My Computer” and double-click the “Control Panel” icon. For users running Windows XP, open “Control Panel”...
  • Page 250 If the USB driver was successfully installed, you can find the following in the “Device Manager”. – the name of the camera you have connected listed under “Disk drives” – “OLYMPUS Digital Camera” listed as one of the items in the “Universal Serial Bus Controller” category...

  • Page 251: Downloading Images To Your Computer

    Downloading images to your computer Double-click the “My Computer” icon on the desktop. For users running Windows XP, click “Control Panel” from the “Start” menu. Double-click the “Removable Disk” icon. A new “Removable Disk” icon appears when the camera is connected to the computer, as the digital camera is recognized as a “Removable Disk”.

  • Page 252: Folder Name

    Downloading images to your computer Double-click the “100olymp” folder. Image files (JPEG files) with files names such as “P1010001.jpg” are displayed. • The camera automatically assigns folder names and file names according to the following rules. File name Folder name (Example) (Example) Serial number...
  • Page 253 Downloading images to your computer The “My Documents” window is displayed. Drag & drop the image you want to save in the computer (in this case, P1010012.jpg) to the “My Documents” window. The image is saved in the computer (in My Documents folder).

  • Page 254: Disconnecting The Camera From Your Computer

    Disconnecting the camera from your computer If your OS is Windows Me/2000, proceed to “Windows Me/2000/XP” ( p.21). Windows 98 Make sure that the lamp on the Lamp right of the viewfinder or the self- timer lamp (which on some models light while the camera is connected to the computer) or the card access lamp is not blinking.
  • Page 255 Disconnecting the camera from your computer Make sure that the lamp on the right Lamp of the viewfinder or the self-timer lamp (which on some models light while the camera is connected to the computer) or the card access lamp is not blinking. Depending on the camera model, the green lamp may light or lamps that were lit while the camera was connected to the computer may go off.
  • Page 256 Disconnecting the camera from your computer Click the “Unplug or Eject Hardware” icon on the task bar. The message saying that the drive has been stopped appears. Click on the message. The “Unplug or Eject Hardware” window appears. When a message appears, click “OK”.
  • Page 257 The image file properties are not displayed correctly. Images in the camera cannot be opened without first downloading them. etc. For more details, visit the Olympus web site. Connecting the camera to the computer ......... 24 Downloading images to your computer........26...
  • Page 258 Connecting the camera to the computer Some camera models have a “USB” setting in the menu. Make sure that “PC” is selected before connecting.This is not required if your camera [SETUP] tab Arrow pad does not have this setting. Menu button For details on how to operate the menu, refer to your camera's reference manual.
  • Page 259 Connecting the camera to the computer Turn the camera on in Lens barrier (playback) mode. • Most cameras with a lens barrier turn on automatically in Step 3, with the exception of some button or models which require you to press button (monitor) button or button.
  • Page 260 Downloading images to your computer Mac OS 9 You can download images from the camera and save them in your computer (in this case, in the Hard Disk). Double-click the “Untitled” icon displayed on the desktop when the camera is connected to the computer.
  • Page 261 Downloading images to your computer Image files (JPEG files) with files names such as “P1010001.JPG” are displayed. • The camera automatically assigns folder names and file names according to the following rules. Folder name File name (Example) (Example) Serial number Month / Day / Serial number •...
  • Page 262 Downloading images to your computer The “Hard Disk” window is displayed. Drag & drop the image you want to save in the computer (in this case, P1010012.JPG) to the “Hard Disk” window. The image is saved in the computer (in the Hard disk).
  • Page 263 Downloading images to your computer Mac OS X Malfunctions such as the following may occur due to the OS. • If the camera is not connected correctly, a malfunction occurs in the computer. • Date and time information of image files is not accurately displayed. •...
  • Page 264 Disconnecting the camera from your computer Make sure that the lamp on the Lamp right of the viewfinder or the self- timer lamp (which on some models light while the camera is connected to the computer) or the card access lamp is not blinking. The lamps and their location vary depending on the model.
  • Page 265 For an OS listed above, you can download images directly to your computer using an optional floppy disk adapter or PC card adapter. For details, see the Olympus Corporate Site or phone customer support. Does your computer have a USB interface?
  • Page 266 Our phone customer support is available from 8 am to 10 pm (Monday to Friday) ET E-Mail: distec@olympus.com Olympus software updates can be obtained at: http://www.olympus.com/digital Olympus Europa GmbH Premises/Goods delivery: Wendenstrasse 14-18, 20097 Hamburg, Germany Tel: +49 40-23 77 3-0 / Fax: +49 40-23 07 61...

This manual is also suitable for:

Camedia c-770 ultra zoomCamedia c-770uz

Table of Contents