Use Of The Remote Control - Philips 26PFL5302D User Manual

Use of the remote control

Note: For most buttons pressing a button once will activate the function. Pressing a second time will de-activate it.
When a button enables multiple options, a small list will be shown. Press repeatedly to select the next item in the list. The list will be removed automatically
after 6 seconds or press to remove immediately.
OK
POWER
Press to turn on/off the TV from or to
standby mode.
The TV is never powered off completely unless it is
physically unplugged.
Demo menu on/off
DEMO
See p. 9.
Color buttons
When functions attached to the color
buttons, the color buttons are shown on
screen.
OPTION
To select the Audio Language, Closed
Captions, Picture format, Equalizer and
Clock.
OK
- to activate a setting
- to display the list of channels stored
(according to the selection made in the
Installation mode (Antenna or Cable), p. 18.
- starts playing content in the Home
Multimedia Browser application, p. 25.
MENU
on/off, see p. 9.
Settings menu
Exit menu from sub-menu.
(Volume)
VOL
Press + or - to adjust the volume.
MUTE
Turn off or on sound.
SOURCE
Press this button repeatedly to select the
source - , , , HDMI 2,
AV 1 AV 2 HDMI 1
or TV
SIDE
when in TV mode, according to where you
connected the accessory devices (p. 21).
To be continued.
�� �����������
������
6
Cursor buttons
Press the cursor buttons up/down, left/right to
navigate through the menus.
Channel selection
CH
- To browse through the TV channels.
- To select between Antenna or Cable TV
channels, first make your selection in the
Settings menu, see, p. 17.
Note: You don't have to start the installation
again once you have searched for and stored
the available TV channels.
PREV CH
Press to alternate between the currently
viewed channel and the previously view
.
channel
.
Press the dot (.) for digital channels.
INFO
: Press to display (when
Display information
available) information about the selected TV
channel and program or accessory device.
The quality and accuracy of the information on
the information banner are transmitted from
broadcasters. You may see a difference in
broadcast time if the broadcaster is from a
different time zone area.
Display clock: Select to activate/deactivate
the clock display on the screen.
ed