D-Link DCS-4603 User Manual page 32

Section 3: Configuration
Shutter: This setting will appear if a custom Exposure Mode is selected. Set the
minimum and maximum shutter speed (in seconds) the camera will use.
Shorter shutter speeds will provide a sharper picture, but require more
available light. Longer shutter speeds will provide a brighter picture in
low-light environments, but may blur objects that are in motion.
Denoise: This setting controls the amount of noise reduction that will be applied to
the picture.
Brightness:
Adjust this setting to compensate for backlit subjects.
Contrast: Adjust this setting to alter the color intensity/strength.
Saturation: This setting controls the amount of coloration, from grayscale to fully saturated.
Sharpness: Specify a value from 0 to 8 to specify how much sharpening to apply to the
image.
WDR Level: WDR makes it easier to see objects that may appear dark due to strong
backlighting conditions during the daytime. Higher WDR levels will make it
easier to see objects in shadows.
Reset Default: Click this button to reset the image settings to the factory defaults.
D-Link DCS-4603 User Manual 32