Page 2
TABLE OF CONTENTS This manual contains user information about the following Zepcam body worn video systems: Zepcam T1, Zepcam T1-XT, Zepcam T1-Live. You can find an extended version and FAQ’s on https://zepcamsupport.zendesk.com ZEPCAM SYSTEM ELEMENTS ZEPCAM T1, T1-XT, T1 LIVE FUNCTIONS...
Page 3
ZEPCAM 1. Zepcam T1-XT recorder 4. 2A USB charger 7. Compact camera 2. Zepcam Live module 5. USB cable 8. Bullet camera 3. Zepcam Remote Control 6. Video cable 9. Wi-Fi module...
Page 4
Use the UP button to browse through the menus Use the SELECT button to select an option in a menu Select Use the SELECT button to switch the Zepcam on and off On/Off button Press SELECT for 10 sec. to reset the Zepcam...
Start recording / Start streaming REC/TAG • Insert a TAG • Press and hold the REC/TAG button for a few seconds to stop recording The remote control is standard paired with the Zepcam. Pair the remote in: SETTINGS >ADVANCED SETTINGS >REMOTE CONTROL >PAIRING >YES.
Page 6
HOW TO USE THE ZEPCAM - SWITCH THE ZEPCAM ON / OFF Press and hold the SELECT button for a few seconds until a white Zepcam screen appears. Select EXIT in the MAIN MENU to switch off the Zepcam LOG IN Before you can use the Zepcam, you have to log in.
Page 7
HOW TO USE THE ZEPCAM - CONNECTING TO PC OR MAC This function will only work when logged in as Super User or Administrator on the Zepcam. • Connect the Zepcam to a PC or Mac using the USB cable •...
RECORDING HOW TO USE THE ZEPCAM - PROFILE If you have a live module and depending on what type, you can select different profile types at PROFILE in the main menu. The selection of a certain profile determines whether a recording is only saved on a sd card or also live streamed at the same time.
Page 9
This can be done using 3G/4G or Wi-Fi. SETTING UP WI-FI STREAMING The first step is to manually connect the Zepcam to a Wi-Fi network. The next steps can be executed on the Zepcam. (See page 2 and 3 for connecting the Wi-Fi module).
Page 10
Switch on the recorder, login with your personal ID and go to SETTINGS >STREAMING SETTINGS >3G/4G >SETTINGS • Now select PROVIDER (the Zepcam will search for mobile provider, this may take a few minutes) and choose your provider with the right subscription •...
LIVE STREAMING HOW TO USE THE ZEPCAM LIVE - For live streaming the Zepcam needs to be setup properly. For more information see Setting up Wi-Fi (p7) and 3G/4G (p8). SELECTING 3G/4G OR WI-FI The Zepcam does not automatically switch between 3G/4G and Wi-Fi.
Page 12
To watch the live video you need to log in on your personal page. You can find this on www.zepcam.com LOGIN TO THE PERSONAL ZEPCAM PAGE •...
Page 13
VIEWING LIVE STREAMING VIDEOS OVER 3G/4G/WI-FI HOW TO USE THE ZEPCAM LIVE - LIVE VIEW • On the left side you will see a of row cameras, the name of the camera is standard the serial number • The color on the left shows the status of the camera: green = streaming, orange = stand-by, red = offline •...
IMPORTANT NOTE! Not all laptops and tablets support Adhoc Wi-Fi connections. VIEWING VIDEOS • After connecting the tablet or laptop to the Zepcam, the Zepcam can be used to log in • Use the Zepcam IP address to log in on your tablet or laptop web browser Standard IP address is: 10.150.160.1...
Page 16
Do you have any questions or issues with the Zepcam? Watch the online advanced ‘ZEPCAM T1 + T1 LIVE manual’ Visit the Zepcam website www.zepcam.com and go to the support department Call the Zepcam support line +31 (0) 853010290 Zepcam...