HOW TO USE THE ZEPCAM LIVE - SETTING UP 3G AND WI-FI HOW TO USE THE ZEPCAM LIVE - LIVE STREAMING HOW TO USE THE ZEPCAM LIVE - VIEWING LIVE STREAMING VIDEOS OVER WI-FI / 3G HOW TO USE THE ZEPCAM LIVE - WI-FI- ADHOC CONNECTION TO ZEPCAM...
Select Use the SELECT button to select an option in a menu On/Off button Use the SELECT button to switch the Zepcam on and off Press SELECT for 10 sec. to reset the Zepcam Down Use the DOWN button to browse through menus This button has several functions •...
Use the STOP button to stop streaming and save your video fi le Audio signal: single long beep Connector Use the connector to connect the Live module to the Zepcam recorder REMOTE CONTROL REC/ TAG The REC/ TAG button has several functions: •...
PLAY BACK VIDEOS on the Zepcam recorder • When recording stops, automatically the MOVIES MENU appears In this menu you will see a list with all the video fi les on the Zepcam • Use the SELECT button to select and play a video fi le •...
Page 7
Select the option ATTACH TO PC • The Zepcam is now connected to your PC and the Zepcam drive will appear on your PC screen • Select the MOVIES folder, you can now copy the video fi les to your PC CHARGING the BATTERY •...
RECORDING HOW TO USE THE ZEPCAM - For local recording make sure the Live module is disconnected or switched off. When the Live module is connected, the Zepcam automatically switches to streaming mode. START RECORDING • Use the LARGE BUTTON or select CAMERA in the MAIN MENU •...
SETTING UP Wi-Fi STREAMING For the fi rst Wi-Fi network setup we recommend to generate a special Wi-Fi setup fi le. Once your Zepcam has access to a Wi-Fi network it is easier to add new Wi-Fi networks via a special web interface.
Page 10
To set up 3G streaming, an UNLOCKED SIMcard with data plan is needed (no PIN lock activated) • Make sure the Zepcam Live module is NOT attached to the Zepcam recorder • Open the live module by using a screwdriver •...
For live streaming the Zepcam needs to be setup properly. For more information see Setting up Wi-Fi (p9) and 3G (p10). SELECTING 3G or Wi-Fi The current version of the Zepcam does not automatically switch between 3G and Wi-Fi. This needs to be done manually. •...
Page 12
• Open VLC media player (VLC player can be downloaded via http://www.videolan.org/vlc/) • Go to your personal Zepcam page and copy the link address of the live stream you want to see • In VLC player go to media •...
Important note! Not all laptops support Adhoc Wi-Fi connections VIEWING VIDEOS • After connecting the tablet or laptop to the Zepcam, the Zepcam can be used to log in • In your tablet’s or laptop’s web browser use the Zepcam IP address to log in.
Page 14
HOW TO USE THE ZEPCAM LIVE - WI-FI ADHOC CONNECTION TO ZEPCAM LIVE VIEWING • This function is only available on laptops that support Adhoc Wi-Fi connections • Install VLC mediaplayer (http://www.videolan.org/vlc/) • Open VLC mediaplayer and go to FILE> Open Network stream (or ctrl/cmd + N) Selecting ‘More options’...
Page 16
Do you have any questions or problems with the Zepcam? Check the ‘ZEPCAM T1 + T1 LIVE MANUAL’ online Check the Zepcam website: www.zepcam.com. Go to the support area. Call the Zepcam support: +31 (0)85-7841906 May 2013en...