How to use the Zepcam - RECORDING Recording preparations Recording Movies Playing movies at pc/ mac How to use the Zepcam - ZEPCAM LIVE Setting up Wi-Fi networks Setting up 3g network Live streaming Viewing Live videos Wi-Fi adhoc connections...
LIST OF SYMBOLS These symbols are displayed on the top of the screen and are used to indicate functions and errors of the Zepcam Battery empty SD not available GPS Disabled Remote disabled Wi-Fi strong signal 3G strong signal Battery full...
ZEPCAM T1-XT LIVE SYSTEM Zepcam T1-XT live package content 3. Zepcam remote 1. Zepcam T1-XT recorder 2. Zepcam Live module control 5. USB cable 7a. Zepcam 7b. Zepcam Bullet camera Compact camera 7b. Zepcam Clipcam 4. USB charger 6. Video cable...
ZEPCAM INTRODUCTION Zepcam functions Live Module Remote control Activating the Zepcam Preparing the Zepcam Charging the battery Activating the Zepcam Getting started...
Page 7
Select Use the SELECT button to select an option in a menu On/Off button Use the SELECT button to switch the Zepcam on and off Press SELECT for 10 sec. to reset the Zepcam Down Use the DOWN button to browse through menus This button has several functions •...
LIVE MODULE STRM Use the connector to connect the Live module to the Zepcam recorder Press the STRM (=Stream) button to start streaming Audio signal: single beep Stream Press the STRM button to add a TAG in the video file while streaming...
Connect camera to Zepcam recorder The camera and recorder are two separate parts of the Zepcam. Before the Zepcam can start recording both need to be connected to each other, using the video cable. Both the Bulletcam and Clipcam video cable are fitted out with a quick release safety connector, enabling the fast and safe release of the video cable.
The Zepcam can be charged by: • Connecting the Zepcam recorder and charger with the USB cable Connecting the Zepcam recorder and PC with USB cable (Charging by computer takes more time to charge) • • Using the external battery CHARGING INDICATORS If the Zepcam is charging it is indicated by the following indicators;...
ACTIVATING THE ZEPCAM To use the Zepcam, the recorder needs to be switched on, charged and the user needs to log in to the Zepcam to be able to control the Zepcam. The following steps will guide you through this process.
ZEPCAM MAIN MENU CAMERA MENU The CAMERA MENU can be used to check the position of the camera and the microphone without recording. If necessary, the position of both can be changed before the recording is started. Next to selecting the CAMERA MENU in the MAIN MENU, the CAMERA MENU can also be started by pushing the LARGE BUTTON if the main menu is visible.
Page 13
REC only; videos are saved on the Zepcam recorder only SETTINGS Inside the settings menu, multiple submenus are clustered to adjust the Zepcam settings according to the user preferences. The SETTINGS MENU consists out of the following sub menus: •...
Page 14
2. Enter login details Reset Zepcam In case the Zepcam does not react, or doesn’t operate properly: reset the Zepcam Press and hold SELECT/ON OFF button for a few secconds OR: For older T1 systems: press the reset button (next to USB connector) using a small object i.e. a paperclip or pencil...
Page 16
RECORDING Recording preparations Recording Movies Playing movies at Pc/ mac...
Select the option CAMERA in the MAIN MENU • Press the LARGE BUTTON Inside the CAMERA menu the next four options are available: • RECORD/STREAM; Start recording/streaming • STANDBY; Zepcam goes in screensaver/keylock • MENU; Back to the MAIN MENU • SETTINGS; Go to SETTINGS...
RECORDING For local recording go to PROFILE > REC ONLY. START RECORDING There are several options to start a recording Using the Zepcam recorder; • Use LARGE BUTTON or select CAMERA in the MAIN MENU • Press RECORD while in the CAMERA menu Using the Remote control;...
NEXT MOVIE; go to next video file • PREVIOUS MOVIE; go to previous video file • DELETE; remove selected video file While playing the video file extra options are available using the buttons on the Zepcam. UP BUTTON Fast forward DOWN BUTTON Rewind SELECT BUTTON Pause, after which the following options appear;...
After transferring the movie files to a pc/ mac the files can be viewed using a video playing application. VIEWING VIDEO FILES Zepcam advices the use of the VLC mediaplayer for playing movies on a pc or mac. Download the VLC media player at: http://www.videolan.org/vlc/ and instal the program •...
ZEPCAM LIVE Setting up Wi-Fi networks Setting up 3g network Live streaming Viewing Live videos Wi-Fi adhoc connections...
Page 22
SETTING UP WI-FI SETTINGS Before you can start video streaming you need to set up the wireless network (3G/4G or Wi-Fi) connection. Setting up Wi-Fi streaming • Go to SETTINGS >STREAMING SETTINGS >WI-FI > ON • Go to WI-FI > NETWORK •...
• Go to SETTINGS >STREAMING SETTINGS >3G/4G >SETTINGS > PROVIDER • Now select provider (the Zepcam will search for mobile provider, this may take a few minutes) and choose your provider with the right subscription • Wait until you see the 3G icon on the top of the recorder screen, which indicates you have a connection. If LINK appears, streaming is possible •...
Press the REC/TAG button on your remote control; press a few seconds to stop recording • Select CAMERA in the MAIN MENU. • Select STREAM to start streaming • Or start the stream via Zepcam cloud service or own server solution Stop and start streaming on Live module and remote control...
VIEWING LIVE VIDEOS There are two ways to view the live video on your (desktop) computer: Zepcam cloud service or VLC player. For both options you need to log in to your personal page at www.camera.zepcam.com. • Go to www.camera.zepcam.com and login with your personal details •...
When using multiple Adhoc connections, multiple Zepcam-id’s can be assigned. Go to SETTINGS ->STREAMING SETTINGS ->WI-FI ->SETTINGS ->ZEPCAM ID • Select on tablet or laptop at available Wi-Fi networks ‘Zepcam Ad-hoc’ (or custom name assigned by you) Note: Not all laptops and tablets support Adhoc Wi-Fi connections Note: average distance is 10m Viewing recorded videos on tablet or laptop •...
Video quality In this menu the quality of recording can be selected according to user preferences. Low quality video files take less space on the memory card. Note! Best quality is the default settings and is advised by Zepcam! Pre-event recording With this feature the Zepcam will save buffered data when recording starts, up to 1 minute Mic.
Page 29
RECORD SETTINGS Advanced record settings Extended filenames: add additional available data to filenames automatically Disk encryption: encrypt video files (yes/no) to avoid unauthorized use Stealth mode: switch on/off all exernal lights & sounds of the hardware Color mode: select one of the available presets Interlaced mode: select ‘interlaced’...
DISPLAY SETTINGS Display brightness The brightness of the Zepcam Display can be changed to user preferences, between High, Medium and Low. Note! The brighter the screen, the more energy it requires! Display during record Set time of the display is active after a recording starts or a tag is inserted.
Page 31
STREAMING SETTINGS Live video streaming Turns on/off live video streaming. Details will show server adres, connection speed details and packet loss percentage. Live audio streaming Turns on/off live audio streaming. Streaming presets Select type of network in combination with most common resolution and available bandwith (type of network/ resolution/amount of video data).
Page 32
Update config files Wi-Fi: manually set up Wi-Fi networks Turn on/off GPS or check GPS status (available satellites etc.) Speedtest Will check maximum bandwith speed Automatic streaming Switch on/off automatic streaming. By activating the Zepcam with automatic streaming switched on, streaming will start instantly.
STREAMING SETTINGS Local storage Switch on/off local storage. Local storage will save the videos to the cloud server ánd internal memory while streaming. Update provider data To manually update APN data.
ADVANCED SETTINGS Language Choose language of preference. Autostart Zepcam will automatically start up when power is supplied. (only available with hardware modifications) Camera type Select preferred camera Reset settings Reset the Zepcam to factory settings Remote control ‘Enable’ , ‘disable’ or ‘pair’ remote control with Zepcam recording unit Use GPS Switch on/off GPS or check status (available satellites etc.)
Page 35
Attach to PC Use this function to attach the Zepcam to a PC or Mac with USB. After enabling the connection movie files or firmware files can be copied to or from the PC/ Mac. The Zepcam will show up as external hard disk on PC/Mac.
ADMINISTRATOR SETTINGS User edit - administrator only The user edit can be used for changing, adding or deleting users of the Zepcam. The menu shows a list of different users able to use the Zepcam. Change existing users After logging in as administrator, select the user account that needs to be changed. The following options can...
Page 37
ADMINISTRATION SETTINGS Movie replay in user mode Enable/disable movie playback on the Zepcam recorder for users. Zepcam feature unlock Insert unique code supplied by your Zepcam team to use special features (i.e. Zepcam PTZ camera) Zepcam ID Create preferred Zepcam ID.
Page 39
Do you have any questions or problems with the Zepcam? Check the Zepcam website: www.zepcam.com. Go to the support area. Call the Zepcam support: +31 (0)85-7841906 jun2012en...