Table of Contents
Advertisement
Setting silent mode
Press and hold
1
second.
Tap
/
2
: Mute (Ringtone 0)
: Vibrate
: Cancel Silent mode
❖ Information
Press and hold the volume down key to set vibrator
･
and press the volume down key while the vibrator is
set to set mute. On the lock screen, during a call, in
some applications such as Camera and WALKMAN,
silent mode cannot be set even if the volume down
key is pressed.
Setting the terminal to silent mode does not mute
･
sounds for shutter, playback of video or music, alarm,
dialpad operation sound during a call or sound
emitted when [End call] is tapped, etc.
While silent mode is set, adjusting volume for
･
"Ringtone & notifications" from "Volumes" (P.153) in
Sound or turning up the volume by pressing the
volume up key cancels silent mode.
P
for over a
/
.
Capturing screenshot
You can save the current displayed screen as
an image (screenshot).
On the screen you want to capture,
1
press and hold
down key for over a second at the
same time.
Screenshot is captured and
･
in the status bar.
❖ Information
Alternatively, press and hold
･
u
second
Tap [Take screenshot] to capture
screenshot.
Drag the status bar downwards
･
captured.] to check captured images in the "Album"
or "Photos" application. Also, tap [Share] to attach
captured images to an application to send or to
share them.
Before Using the Terminal
P
and volume
appears
P
for over a
u
Tap [Screenshot
41
Advertisement
Table of Contents
