Table of Contents
Advertisement
Use a compatible AC adapter or microUSB
･
cable for charging. If you use a charger other
than compatible ones, charging may not be
available or operations may not be performed
correctly.
Insert and remove the AC adapter cable or
･
microUSB cable slowly and evenly so that
excessive force is not applied.
When charging starts, notification LED of the
･
terminal turns on (P.42).
To check the battery level, see the status bar at
･
the top of the screen or from the Home
u
screen, tap
[Settings]
u
phone]
[Status] to see "Battery level".
When you start charging with the terminal
･
powered off, the power turns on. However,
you cannot operate the terminal. Power off
the terminal in a place where the use is
prohibited such as in airplane or hospital for
this reason.
u
[About
Charging with Desktop Holder
When using supplied Desktop Holder SO20
and AC Adapter 04 (optional) for charging, do
the following procedures.
Be sure to attach the supplied attachment
･
(Attachment 37A or Attachment 37B) to the
Desktop Holder when charging (P.33). The
terminal cannot be charged on the Desktop
Holder without attachment.
Notification LED
Desktop holder
Charging jack
microUSB plug
Insert a microUSB plug of the AC
1
adapter into the charging jack on
the back side of the desktop
holder with the engraved side (B)
facing up ( ).
Before Using the Terminal
AC adapter
32
Advertisement
Table of Contents
