Effect Control - NJS NJS800 Manual

Manual Bass
Press [Manual Bass] button, the manual bass function is on, the 19 keys on the
left part of the keyboard change into bass keys but still keep the original timbre.
However, the timbre of the other keys can be changed.
Press [Chord Off] button to cancel this function.

EFFECT CONTROL

Transpose
Press "Transpose"[+] / [-] button to process transposing on the keyboard, and the
current data is displayed on LED window. The range of the transposition may be
adjusted from "-12" to "12" semitones.
Press [+] and [-] button at the same time, the keyboard turns normal with the
preset stage "00".
Sustain Function
Press [Sustain] button with "S-1" appearing on the LED screen, the sustain
function is on, and the sounds of note keys take on a sustain effect. Press the
button again to turn the function off, the screen displays "S-0".
Vibrato Function
Press the [Vibrato] button with screen displays "ON", the vibrato function is on,
and the sounds of note keys take on a vibrato effect. Press the button again to
turn the function off , the screen displays "OFF",
Record
Press [REC] button with the screen display "rEC", In this state, all the notes that
are played can be recorded. Press [REC] button again to turn off the record
function. Up to 63 notes can be recorded. Press [Playback] button, the screen
displays "PLY", the instrument plays the melody which was just recorded.
Program
The system in the instrument can be used to make up a piece of percussion
which is able to be an accompaniment to the performance.
Programming
Press [Prog] button, the screen shows "Prg", any type of panel or keyboard
percussion can be selected to edit a piece of rhythm. Press the button again to
stop recording. Up to 32 selections can be programmed.
Page 9