PROBLEM
POSSIBLE CAUSE
The nozzle hole is clogged with
food particles.
A nozzle does not
The nozzle is blocked by a dish or
rotate smoothly.
pot and cannot rotate.
Water won't
The drain is clogged.
pump out of the
dishwasher.
Has a bent upper
The dishes are not loaded
rack after loading
properly.
dishes.
SOLUTION
Clean the nozzle hole. See page 20.
After placing the dishes into the racks,
rotate the nozzles by hand to check
whether any of the dishes interfere with
them.
Contact a qualif ied service technician to
remove any obstruction from the drain hose
and check the drain pump operation.
Load your dishes as recommended.
(See page 14.)
English - 25