The ir service remote control has been specially developed for commissioning the busch-watchdog masterline
movement detector at the customer's place. it assists the electrical installer to remotely operate and adjust all
functions, test mode and setting (12 pages)
Operating Instructions Busch-Watchdog Pos: 5 /#Neustruktur#/Online-Dokumentation (+KNX)/Inhaltsverzeichnis (--> Für alle Dokumente <--)/Inhaltsverzeichnis @ 19\mod_1320649044386_15.docx @ 109653 @ @ 1 Intended use ................................3 Environment ................................3 Setup and function ..............................4 Features of function and equipment ......................4 Operation ................................. 5 Technical data................................
Operating Instructions Busch-Watchdog Intended use Pos: 7 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/1. Ebene/A - F/Bestimmungsgemäßer Gebrauch @ 18\mod_1302763321316_15.docx @ 103483 @ 1 @ 1 Intended use Pos: 8 /#Neustruktur#/Online-Dokumentation (+KNX)/Bestimmungsgemäßer Gebrauch (--> Für alle Dokumente <--)/Busch-Dimmer/Bestimmungsgemäßer Gebrauch @ 23\mod_1335350449857_15.docx @ 208763 @ @ 1 The device is to be used exclusively with the components that are supplied and licensed as described in chapter "Setup and function".
Pos: 14 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/2. Ebene/A - F/Funktions- und Ausstattungsmerkmale @ 23\mod_1336557630140_15.docx @ 209136 @ 22222222 @ 1 Features of function and equipment Pos: 15 /#Neustruktur#/Online-Dokumentation (+KNX)/Aufbau und Funktion/Waechter/Ausstattungsmerkmale - 6179 IR-Handsender KNX @ 30\mod_1348221805253_15.docx @ 237827 @ 2222222222 @ 1 The remote control has seven buttons which can be freely assigned (see chapter "Operation").
Pos: 23 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/1. Ebene/G - L/Inbetriebnahme @ 11\mod_1279185496977_15.docx @ 83035 @ 2222222 @ 1 Commissioning Pos: 24 /#Neustruktur#/Online-Dokumentation (+KNX)/Erstinbetriebnahme/Waechter/Hinweis - Inbetriebnahme - 6179 - IR Handsender KNX @ 30\mod_1348221983053_15.docx @ 237883 @ 2222222122 @ 1 Note The IR remote control is coded and must be programmed to the Busch-Watchdog during commissioning ("Programming the device").