Cleaning The Filter - Hoover T 185 E/1 User Instructions

EN RU EN RU
CLEANING THE
FILTER
The washing machine is
equipped with a special filter
which catches large items
which could block the drainage
duct (coins, buttons, etc.). This
means that they can be easily
recovered. When it is necessary
to clean the filter, proceed as
follows:
• Use a basin to collect the
water coming out.
• To open, release the catch
securing the lid.
• Use a screwdriver to loosen
the screw holding the filter in
place.
• Turn the filter anticlockwise as
far as it will go.
• Remove the filter and clean it.
• Once it is clean, replace the
filter by following the above
mentioned procedure in
reverse.
REMOVALS OR LONG
PERIODS WHEN THE
MACHINE IS LEFT STANDING
For eventual removals or when
the machine is left standing for
long periods in unheated
rooms, all the pipes should be
emptied of all remaining water.
The mains switch must be
unplugged. A bowl is needed.
Detach the pipe from the clamp
and lower it over the bowl until
all the water is removed.
Repeat the operation at the
opposite end.
30