Harman-kardon hkts 15home theater speaker system owner's manual (16 pages)
Summary of Contents for Harman Kardon GLA-55
Page 1
GLA-55 GLA-55/230 Two-Piece 2.0 Multimedia Speaker System SERVICE MANUAL harman/kardon, Inc. 8500 Balboa Blvd. Released 2009 Northridge, CA. 91329 Rev0 4/2010 Discontinued XXXX...
Page 2
DISASSEMBLY INSTRUCTIONS………..……….….…11 DISASSEMBLY IMAGE AIDS……………….…….….…14 NOTE ON ELECTRONICS……………………….…..…16 ELECTRICAL PARTS LIST…….…………………….…17 PCB DRAWINGS……………………………..……….…23 SCHEMATICS……………………………………..…..…24 GLA-55 SPECIFICATIONS Power Output 56 Watts RMS per channel Frequency Response (–10dB) 35Hz – 20kHz (- 10dB) Dimensions (W x D x H) 5 x 10.5” (127mm x 267mm) Weight per Speaker 2.5lb (1.2kg)
Page 3
Beauty and sound • The GLA-55 is a stylized multimedia focal point. Not just an exceptionally high-quality audio system, it’s also – from its chrome base to its fully visible audio engine and port – a piece of art. No detail is left unrefined. The faceted cut-glass enclosures are a first in desktop audio systems, and will integrate beautifully with home and office décor.
Page 4
Part Number Description 900-0478-001 GIFT BOX, HK CRYSTAL AC SUPPLY CORD NEEDED WITH 700-0072-001 950-0084-002 WARRANTY CARD; GENERIC HARMAN MULTIMEDIA 905-0032-001 FOAM, CUSHION, TOP, EPE, HK CRYSTAL AC PWR CORD US 500-0130-001 905-0033-001 FOAM, CUSHION, BOTTOM, EPE, HK CRYSTAL AC PWR CORD EU 500-0130-002 500-0368-001 CABLE, STEREO, 3.5MM, STRAIGHT ON ONE SIDE, RT ANGLE...
Page 6
GLA-55 harman/kardon GLA-55 • LED’s and Auto-ON feature: The unit has an Auto-ON/Standby feature (like many of our other home subwoofers) The indicator is a white LED at the front of each loudspeaker LED operation: • Steady ON when the unit is powered up and receiving a signal (playing).
Page 11
GLA-55 GLA-55 PARTS LIST (LEFT, PASSIVE) LOUDSPEAKER Item # Part Number Description 100-0092-001 HOUSING, LEFT SIDE, 100-0093-001 HOUSING, RIGHT SIDE, 120-0089-001 BAFFLE, LEFT, HK GLA-55 060-0308-001 ASY, PORT, 050-0168-003B WOOFER, HERCULES ALUMINUM, 4 OHM, COSMETIC, 050-0132-003B TWEETER, CMMD LITE, 4 OHM, COSMETIC,...
Page 12
There a number of pads, gaskets, adhesive, and surfaces with double-sided tape on this product. Attention must be paid to these areas when the GLA-55 is disassembled. If these materials are damaged, removed, or disturbed, they must be replaced in their original location, or the air integrity of the product will be compromised and fidelity may suffer.
Page 13
(2) black two-hole grommets (#29 on the drawing/parts list) will need adhesive added to seat them, and to seal the buss wires threading through the holes; use silicon sealer or similar adherent. III GLA-55 disassembly Right, Master speaker (w/amplifier) 1) Support the loudspeaker with one half section of the packing foam with the base facing upwards.
Page 14
GLA-55 7) There are (6) connections that need to be desoldered (they appear as blobs of solder). Desolder and remove all excess solder with braided wick or a desoldering tool. 8) Remove the small circuit board; detach and watch for the small, loose “light pipe” that you do not lose it.
Page 17
GLA-55 The electronics in the GLA-55 should be replaced in its entirety with MAIN PCB part# 400-0190-001. Should this part become unavailable, the schematic and parts list are included for reference only. Individual components are not stocked. For assistance in...