Table of Contents
Advertisement
Quick Links
GPS Tracking System
GT02
Thank you for purchasing the tracker. This manual shows how to operate the device
smoothly and correctly. Make sure to read this manual carefully before using this
product. Please note that specification and information are subject to changes without
prior notice in this manual. Any change will be integrated in the latest release.
Advertisement
Table of Contents
Related Manuals for DYTECH GT02
Summary of Contents for DYTECH GT02
- Page 1 GPS Tracking System GT02 Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without...
-
Page 2: Table Of Contents
Contents ◆Quick using ........................ 3 ◆Installation attentions ....................3 ◆Attentions ................. 错误！未定义书签。 1. Summary ......................... 4 2. Main functions ......................4 3. Specs........................4 4. Installation instructions ................... 5 5. Power Wires connection ..................6 6. Device Parameter Settings ..................7 6.1 Initialization ...................... -
Page 3: Quick Using
◆Quick using 1）Proper insert GSM card, connect external power supply 12V/24V, Must turn on small switch inside SIM card hole. 2）Put device outside, around 45-90s three lights will keep lighting on stands for device can work normally. 3） Dialing device number, it will hang up and reply tracking message with valid Long and lat to show location. -
Page 4: Summary
1. Summary Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or GPRS. 2. Main functions · GSM quad-band frequency; · Real time tracking location by SMS/GPRS; · Real time voice monitoring; ·... -
Page 5: Installation Instructions
4. Installation instructions 4.1 Preparation Choose SIM card, need insert a GSM SIM card into device. Notice: Please insert SIM card before turning the device power switch to on; The SIM card need open the GPRS function; Please make sure SIM card with full balance. 4.2 Installation The device is hidden type installation, we suggest the device installing by professional institution. -
Page 6: Power Wires Connection
Note: the three lights must be stable lighting represents device can work normally. Device will turn into sleep mode with lights off after around 5 minutes, it will wake up if make a call to device number. 5. Power Wires connection 1. -
Page 7: Device Parameter Settings
6. Device Parameter Settings 6.1 Initialization Send SMS “#begin#password#” to the tracker, it will reply “begin ok”. (Default password:123456). For example, send SMS “#begin#123456# ”, If succeeded, it will reply “begin ok”. 6.2 Set password “#password#old password#new 6.2.1Set: Send SMS: password#”... -
Page 8: Auto Continuous Track
then it will not respond when an unauthorized number calls it. 6.4.2 Dialing tracking: make a call to device number, it will hang up and reply a real-time tracking message as below picture: 6.4.3 SMS tracking: send SMS“#smslink#123456#”, it will reply a real-time tracking message as below picture: 6.5 Auto continuous track 6.5.1 Unlimited time auto track: Send SMS... -
Page 9: Overspeed Alarm
“tracker ok!” and restore to “track” mode. 6.7 Overspeed alarm 6.7.1 Set up: Send SMS:“#speed#password#speed number in 3 digits#” to the device (suppose the speed is 80km/h), EG, send SMS “#speed#123456#080#”, and it will reply “speed ok ”. When the car moves exceeding 80 km/h, the unit will send SMS alert “speed alarm”... -
Page 10: Acc On Alarm
6.9 ACC ON alarm 6.9.1 Send SMS"#ACC#ON#" to device to start illegal start alarm function, when vehicle ignition on, device will reply "ACC!!" to the authorized number. 6.9.2 Send SMS"#ACC#OFF#"to device to close the function. 6.10 Time Zone Setting Remark: UTC+8 is default time zone. “#timezone#password#direction#time zone value in 6.10.1 Send SMS munites#”. -
Page 11: Ip And Port Setting
need to write APN user name and password. 6.13 IP and Port setting “#IP#password#ip address#port 6.13.1 Send SMS number#”. If succeeded, “set ip address and port ok” will be returned by SMS. E.g, Send SMS command “#IP#password#116.205.4.114#8169#” to the device (116.205.4.114 is IP, 8169 is port ) 6.14 Cut oil or circuit (optional) Send SMS “#stopoil#password#”... -
Page 12: Web Platform Gps Tracking Software
6.18 Web platform GPS tracking software Web based platform www.gps228.com, further details please contact manufacturer. Web platform features as below: ◆ Real time tracking ◆ History trace replay ◆ Platform disable oil or recover oil ◆ Multiple user fleet management ◆...
Need help?
Do you have a question about the GT02 and is the answer not in the manual?
Questions and answers