Rs-232 And Telnet Commands - Elan EL-4KM-VW44 User Manual

RS-232 and Telnet Commands (Continued)
RS-232
RS232 COMMAND
?
HELP
STATUS
PON
POFF
IRON/OFF
KEYON/OFF
DBGON/OFF
BEEPON/OFF
RESET
RESET ALL
OUTxxON/OFF
OUTxxFRyy
EDIDxxCPyy
EDIDxxDFzz
OUTMODEmm
OUTMVFRyy
OUTVWFRyy
OUTxxVCLbb
OUTxxVCRbb
OUTxxVCTbb
OUTxxVCBbb
INxxFRyy
MVAUDaa
18
Print Help Information
Print Help Information
Print System Status And Port Status
Power On, System Run On Normal State
Power Off, System Run On Power Save State
Set System IR Control On Or Off
Set System KEY Control On Or Off
Set Debug Mode On Or Off
Set Onboard Beep On Or Off
Reset System To Default Setting (Should Type "Yes" To Confirm, "No" To Discard)
Reset System And Network To Default Setting
Set OUTPUT:xx On Or Off
xx=00: Select All OUTPUT Ports
xx=[01...04]: Select One OUTPUT Port
Set OUTPUT:xx From INPUT:yy
xx=00: Select All OUTPUT Ports
xx=[01...04]: Select One OUTPUT Port
yy=[01...04]: Select One INPUT Port
Copy EDID from output (yy) to input (xx)
Both yy & xx can be set individually (01-08) or as ALL (00)
Set Input:xx EDID To Default EDID:zz
zz=00: HDMI 1080p@60Hz, Audio 2CH PCM
zz=01: HDMI 1080i@60Hz, Audio 2CH PCM
zz=02: DVI 1920x1080@60Hz, Audio None
zz=03: DVI 1280x1024@60Hz, Audio None
zz=04: DVI 1280x720@60Hz, Audio None
zz=05: User EDID 1
zz=06: User EDID 2
zz=07: GUI Download EDID
Set Output mode:
mm = MX (matrix)
mm = MV (multi-view)
mm = VW (video wall)
mm = MV01, MV02 etc (multi-view layout 1, layout 2 etc)
mm = MV01, MV02 etc (multi-view layout 1, layout 2 etc)
mm = VW22 (video wall 2x2), VW41 (video wall 4x1), VW14 (video wall 1x4 )
Set Multi-View Main window (window 1) from input yy=[01...04]: Select One INPUT Port
Set Video Wall Output from input yy (01-04)
Pixel shift when in Video Wall mode
xx = Output port (01-04 or 00 for all outputs)
VCL = Left border
VCR = Right border
VCT = Top border
VCB = Bottom border
bb = Pixel shift (00-100)
Set input video type to HDMI or VGA
xx = Input port (01-04 or 00 for all inputs)
yy = HDMI (from HDMI signal)
yy = VGA (from VGA signal)
Multi-View audio output from input aa
aa = 01-04 (inputs)
aa = 00 (audio will follow output/window 1)
DESCRIPTION
EL-4KM-VW44 USER MANUAL
www.elanhomesystems.com