Backup And Initialization - Yamaha DD-75 Owner's Manual

Backup and Initialization

Backup
Some internal parameters will be backed up to internal memory even if the power is turned off.
You can initialize all internal memory to the default settings or initialize the memory with the exception of the
Songs.
Following parameters remain in memory
• User Songs (including songs loaded from
computer)
• Custom Kit "C01"–"C10"
• Pad/Pedal Sensitivity*
• Click Volume
• Click Voice
• Auto Kit Select ON/OFF
• Song Volume
* Value selected when the power is turned off and values assigned to Custom Kit "S01"–"S10."
Initialization
This function erases all backup data in the instrument's flash memory and restores the initial default settings.
The following initialization procedures are provided.
 Initial Clear
To clear all data backed up to the internal flash memory (described above), turn the power on by pressing the
[ ] (Standby/On) switch while holding the [DEMO] button. The backed up data will be erased and the default
values restored.
NOTICE
• When you execute the Initial Clear operation, all backup data will be cleared. You can save the
data of the five built-in User Songs to a computer by using Musicsoft Downloader.
 Back Up Clear
To clear all backed up data that has been memorized to the internal flash memory (with the exception of song
data), turn the power on by pressing the [
• Pad Start ON/OFF
• MIDI Note Number Auto Selection ON/
OFF
• MIDI Note Number
• Master EQ Type
• Auto Power Off Time
• Battery Type
"FCL" appears, followed by song
number "001"
] (Standby/On) switch while holding the [FUNCTION] button.
"Clr" appears, followed by
song number "001"
41
DD-75 Owner's Manual