The Functions - Yamaha DD-75 Owner's Manual

The Functions

The "Functions" provide access to a range of detailed instrument parameters. Find the desired item in this Func-
tion List.
1 Press the [FUNCTION] button.
2 Press the [DRUM 3] or [BACKING] button a number of times until desired item appears.
3 Use the dial to set.
4 Press the [FUNCTION] button to exit from the mode.
Display Function
Click
Time Signature
CLn
Numerator
Time Signature
CLd
Denominator
CLL
Click Volume
CLC
Click Voice
Kit
rbt
Reverb Type
AtS
Auto Kit Select
Song
SGL
Song Volume
PdS
Pad Start
MIDI
LCL
Local Control
ECL
External Clock
MIDI Note Number
AnS
Auto Selection
not
MIDI Note Number
Others
Eqt
Master EQ Type
APt
Auto Power Off Time
btt
Battery Type
* The appropriate value is automatically set for each song or kit.
40
DD-75 Owner's Manual
Range/Settings Default Value
0–16
2/4/8/16
0–127
Metronome (trn)/
Cowbell (CbL)/
Stick (StC)
Stick (StC)/
Human voice (Hun)
Off (oFF)/
Hall 1 (HA1)/
Hall 2 (HA2)/
Hall 3 (HA3)/
Room 1 (ro1)/
Room 2 (ro2)/
Stage 1 (St1)/
Stage 2 (St2)/
Plate 1 (PL1)/
Plate 2 (PL2)
ON (on)
ON (on)
OFF (oFF)
0–127
ON (on)
OFF (oFF)
OFF (oFF)
ON (on)
ON (on)
OFF (oFF)
ON (on)
OFF (oFF)
OFF (oFF)
ON (on)
ON (on)
OFF (oFF)
-C2–G8 (0–127)
Speaker (SP)/
Speaker (SP)
Headphone (HP)
OFF/5/10/15/30/60/120
30 (min.)
(min.)
Alkaline-manganese Alkaline-
(ALn)/Nickel hydride manganese
(n-H) (ALn)
Description
Determines the numerator for the time signature
*
of the Click.
Determines the basic note value for each mea-
*
sure.
100 Determines the volume of the Click.
Determines the Click sound.
* Selects a Reverb type.
Determines whether the Auto Kit Select function
is on or off.
100 Determines the volume of Songs.
Determines whether the Pad Start function is on
or off.
Determines whether the instrument's pads and
pedals controls the internal tone generator (ON)
or not (OFF).
Determines whether the instrument synchronizes
to the internal clock (OFF) or an external clock
(ON).
Determines whether to assign MIDI note number
automatically (ON) or manually (OFF).
Assigns MIDI note numbers for each pads and
-
pedals.
Determines whether the sound is heard through
internal speakers (SP), or headphones or an
external speaker system (HP).
Specifies the time that will elapse before the
instrument's power is automatically turned off.
Selects the type of batteries you have installed to
this instrument.
Page
25
26
26
27
21
31
29
30
Refer to
"MIDI
Refer-
ence
Manual"
14
14
13