Empire Comfort Systems VFHS-20R-1 Installation Instructions Manual page 24

OPTIONAL BLOWER INSTALLATION INSTRUCTIONS (continued)
Figure 3
assembly. Align clearance hole on left flange of burner
assembly with screw hole on blower shield side. Attach
burner assembly to blower shield side with one (1) 10 x 1/2"
screw. (See Figure 3 for not installed or Figure 4 for
installed)
22. Remove 10 x 1/2" screw located on left, front of valve
Page 24
Figure 4
cover on burner assembly. Insert blower shield front
adjacent to blower motor and blower shield side. Align
clearance hole on blower shield front with left, front
screw hole on valve cover. Attach blower shield front to
valve cover with 10 x 1/2" screw. (See Figure 3 for not
installed or Figure 4 for installed)
23. For fireplace that is not installed, replace burner assembly
into interior of fireplace.
24. Place inner casing in front of outer casing.
25. Insert inner casing assembly into outer casing.
VFHS-20/10