iRobot ROOMBA 800 SERIES Owner's Manual page 12

Cleaning the Sensors and
Charging Contacts
1
Wipe the sensors and charging contacts with
a clean, dry cloth. Do not spray cleaning solution
EN
directly onto the sensors or sensor openings.
8 For more information, visit www.irobot.com/Roomba800
Cleaning the Extractors
1 Pinch the yellow extractor
frame release tabs, lift up the
extractor frame and remove
any obstructions.
2
Remove the extractors and
remove the extractor caps.
Remove any hair or debris that
has collected underneath the
caps and around the metal axles.
Reinstall the extractor caps.
3
Remove hair and debris from the
square and hexagonal plastic
pegs on the other side of the
extractors.
4
Clear the vacuum path.
5
Reinstall the extractors. Match the
color and shape of the extractor
pegs with the color and shape of
the extractor icons on the cleaning
head module.