Remove The Ss-Board; Remove The Fan; Remove The Stand Bracket; Remove The C1-Board - Panasonic TX-PF42G30 Service Manual

8.10. Remove the SS-Board

1. Remove the Tuner unit. (See section 8.5.)
2. Disconnect the connector (SS11).
3. Disconnect the flexible cable (SS33).
4. Disconnect the flexible cables (SS61 and SS66).
5. Remove the screws (×7

8.11. Remove the Fan

1. Unlock the cable clampers to free the cable.
2. Remove the screws (×3
3. Remove the Relay connector and remove the Fan.
) and remove the SS-Board.
).

8.12. Remove the Stand bracket

1. Remove the Plasma panel section from the servicing
stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.
2. Remove the AC inlet. (See section 8.2.)
3. Remove the Stand bracket fastening screws (×5
) and the Stand bracket.

8.13. Remove the C1-Board

1. Remove the Stand bracket. (See section 8.12.)
2. Disconnect the flexible cables (CB1, CB2, CB3, CB4,
CB5, CB6 and CB7).
3. Disconnect the flexible cables (C10 and C11).
4. Disconnect the connector (C14).
5. Remove the screws (×4
8.14. Remove the C2-Board
1. Remove the Stand bracket. (See section 8.12.)
2. Disconnect the flexible cables (CB8, CB9, CB10, CB11,
CB12, CB13, CB14 and CB15).
3. Disconnect the flexible cables (C20, C21 and C23).
4. Disconnect the connector (C25).
5. Remove the screws (×4
23
) and remove the C1-Board.
) and remove the C2-Board.
, ×4